Single chip computer digital circuit technology, Measurement range 10~ 1000mN, Indication Error +/- 1%, with 4-bit direct reading display and printing function, Test speed 1.2 +/- 0.24mm/s, suitable for accurate detection of softness.
In accordance with IULCS. IUP 136 standard, the load is 500g, the scale range is 0.1-10 mm, the Portable design is easy to operate and maintain, and can detect the uniformity of leather Softness and site differences.
The probe is designed with a depth of 8mm and a Probe width of 400mm, which simulates the softness of the hand. It supports a variety of slot-die width configurations. The built-in thermal printer can directly output the test results.
Test speed of 1.2mm/s and press depth of 8mm, equipped with 5-20mm multi-specification narrow width sample table, slot-die parallelism error ≤ 0.05mm, to ensure accurate and reliable softness measurement.
Measurement range 10~ 1000mN, Test speed 1.2mm/s, 3.5-inch color LCD display test Linear dispersion, built-in thermal printer can directly output test reports, suitable for a variety of slot-die width tests.
The probe is applied with a load of 530 +/- 10g, and the leather is pressed at a constant speed. The softness index is directly read through the electronic watch, which is suitable for testing a variety of leather types.
Lever principle measurement device to reduce data fluctuations, equipped with High Accuracy Force Sensor, Measurement range 10~ 1000mN, accuracy 0.1mN, and built-in thermal printer directly output clear report.
Conductivity Detector temperature compensation technology, Measurement range 8~ 40%, accuracy +/- 0.5%, Response Time 1 second, with backlight display and automatic shutdown function, portable design weight only 175 grams.
Measurement principle using Conductivity Detector method, Measurement range 8~ 40%, accuracy +/- 0.5%, with automatic compensation function of Temperature and Humidity, Response Time is only 1 second, Portable design weight about 203 grams, suitable for on-site rapid detection.
Conductivity Detector Measurement principle, Measurement range 8~ 40%, accuracy +/- 0.5%, Response Time only 1 second, with temperature and humidity compensation technology, probe Sensor can be deeply measured inside the material, support multi-gear design and Interface customization.
Micro Sensor measurement and control system to achieve automatic measurement, Measurement range 10~ 1000mN, accuracy +/- 1%, built-in thermal printer can directly output test reports, support custom slot-die width.
Response speed is improved with ARM processor, Measurement range 10-1000mN, accuracy +/- 1%, equipped with four-speed adjustable slot-die 5-20mm, support sudden power failure data saving and real-time pressure Linear dispersion display function.
The vacuum pressure plate is made of pure bronze, the drying temperature can be adjusted from room temperature to 120 ℃, equipped with double drying stations and intelligent drainage system, and the paper uniformity can reach 96.
Using digital DC motor to achieve stepless speed regulation of 1~ 1000mm/min, equipped with arc synchronous toothed belt and precision screw auxiliary drive system, the test accuracy can reach 1 level, and the test can be automatically completed and the maximum force value can be memorized.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
