Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Wire-wound design can achieve 80 micron wet film thickness, diaMeter 9 mm, total length 245 mm, suitable for comparison specimens, one Spreader can handle a variety of Coatings.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
Glass material ensures that the film is flat, used with wire Rod or Film Applicator, the specification size is 110 * 180mm, and the operation is simple and efficient.
Wire-wound molding process, wet film thickness of 80 microns, effective application width of 25.5 cm, can be used at the same time Spreader a variety of Coating comparative experiments, with Drawdown Plate use effect is better.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
The wire-wound process is employed, achieving a wet film thickness of 52.6μm, with a coating width of up to 300mm. A 50mm grip area is provided at both ends for ease of operation, and the stainless steel material ensures durability.
Scraper needle diaMeter 0.45mm or 0.125mm optional, scraping speed 10~ 60 times/minute adjustable, automatic detection wear insulation and stop, to ensure Test accuracy and efficiency.
A groove control film is formed on the smooth Rod body by extrusion process. The wear-resistant stainless steel material is not easy to break the wire and is easy to clean. The wet film thickness is 105.2 μ m and the application width is 300mm.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
