Travel range of the crimp is 0~ 2.5mm, measurement error is +/- 1HAO, and the end pressure of the crimp is 0.55~ 8.05N, which is suitable for accurate Hardness detection of low Hardness rubber materials.
Travel range 0~ 2.5mm, resolution 1HD, suitable for high-Hardness rubber and engineering plastics and other materials on-site determination, in line with multinational standards.
Suitable for materials such as high Hardness rubber and engineering plastics, pressing needle Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, in line with ASTM D 2240-05 and GB/T2411-2008 standards.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, error +/- 1HA, can be used in the matching measuring rack or handheld, to meet a variety of rubber hardness testing needs.
The guide rail type is easy to operate, the positioning pin ensures accuracy, the pressing device reduces errors, the sampling thickness is less than 1.0mm, the parallelism is less than 0.1mm, and a variety of standard samples can be cut.
Travel pin 0~ 2.5mm, resolution 1HA, measurement error +/- 1HA, suitable for field Hardness measurement, in line with multinational standards.
Pin Travel 0~ 2.5mm, Resolution 1HOO, Measurement range 0~ 100HOO, Error +/- 1H00, Sensitivity High, Suitable for Laboratory Accurate Measurement of Soft Rubber Foam Rubber Hardness.
Travel pressure needle 0~ 2.5mm, resolution 1HOO, measurement error +/- 1H00, Sensitivity, suitable for soft rubber foam rubber and other hardness of materials, need to be used with constant load measuring frame.
Using the electromagnet cissing pendulum, it can measure the thickness of the test plate from 0.1mm to 5.5mm, and is equipped with two laser Probes to record data. The swing period is 0.625s.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
The electromagnet cissing pendulum is used, which can adapt to the thickness test plate of 0.1mm to 5.5mm, and is equipped with two laser Probe to record data. The swing period is 1.4 seconds and 1 second respectively, and the organic Glass door cover reduces the influence of airflow.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
Pin Travel 0-2.5 mm, Measurement range 20-90HD, error +/- 1HD, weight only 0.16kg easy to carry, can be used with racks or handheld to meet different testing needs.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
