Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Hall flow rate swirl/spin Sensor, can measure pollution turbid water flow, speed range 0.01-5 m/s, flow measurement error ≤ 1.5%, support -10 ℃ to 50 ℃ environment temperature work, simple and lightweight structure and low power consumption.
Velocity range 0.01-5 m/s, flow measurement error ≤ 1.5%, support sewage environment test, simple and lightweight structure, Degree of automation is high, stable and reliable.
Velocity range 0.01-10 m/s, flow measurement error ≤ 1.5%, using measuring Rod positioning measurement method, lightweight structure and support automatic calculation of flow rate formula.
Made of stainless steel, with a flow hole diaMeter of 3.0 +/- 0.01mm and a viscosity range of 7-40mm ²/s, it is suitable for testing the outflow time of Newtonian or near-Newtonian liquids and meets ISO and GB standards.
Speed measurement range: 0.01-6.00 m/s, flow measurement error ≤1.5%, lightweight and portable structure, high degree of automation, capable of stable operation in sewage environments.
Flow rate of spray 0-80CFM adjustable, spray distance 3-4 feet, visualize airflow direction and speed, support 30 minutes of continuous spray, easy flow and pressure equilibrate test.
Bakelite Cup body and stainless steel filter, flow time 0~ 150 seconds, flow hole diaMeter of 4mm, capacity of 100ml, in line with GB/T 1723 standard, can be used with the bracket to improve Stability.
Using the measuring Rod positioning measurement method, the speed range is 0.01-10 m/s, the flow measurement error is less than or equal to 1.5%, with liquid crystal display and LED backlight, supporting -10 ° C to 50 ° C environment temperature, simple and stable structure.
Driven by brushless DC motor, Speed range 60~ 1500rpm, Acceleration 1~ 250rpm/s. Supports forward and reverse alternating and intermittent stirring, programmed control ensures mixing uniformity and Repeatability.
The quasi-closed Glass damper prevents external air flow from penetrating, the dual-gear adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel countertop is resistant to corrosion and easy to clean, and the purification efficiency reaches 100 levels.
Made of stainless steel, with a flow hole diaMeter of 6mm and a viscosity range of 134-685mm ²/s, it is suitable for standard viscosity testing, and the flow time is controlled between 30 and 100 seconds.
Standard funnel method for metal powder flowability measurement, equipped with 2.5mm and 5mm pore diaMeter stainless steel funnel, can accurately measure 50g powder flow time to +/- 0.01s, suitable for powder testing such as cemented carbide.
The quasi-closed Glass damper prevents external air flow from penetrating, the two-speed adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel integrated molding experimental area is resistant to corrosion and easy to clean, and the cleanliness level reaches 100.
