Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
The test program can be uploaded to the Viscometer host, the analysis record data can be collected, the rheological Linear dispersion and Excel can be generated, and five sets of data can be plotted and compared at the same time.
Measurement range 0-150 seconds, copper material is durable and in line with national standards, portable design is convenient for on-site rapid detection of Coating viscosity.
Measurement accuracy of 0.1 ℃, range of 0~ 100 ℃, real-time display of temperature values, suitable for a variety of Viscometer models, to ensure a stable test environment.
Equipped with dual probes for simultaneous measurement of asperity and Coating thickness, Measurement range 3.4mm, minimum scale 1μm, support corrosion pit depth detection, in line with international standards such as ISO 2808.
Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.
Made of high-quality wear-resistant and corrosion-resistant alloy steel, the film Film thickness range is 250-4000 μm, and the flow of Coating in 2D state when the wet-film is placed horizontally can be measured.
Measurement accuracy +/- 2%, equipped with 5 calibrated oils to ensure measurement accuracy, as a special accessory for cone-plate viscoMeter to achieve stability testing.
The shear rate is 2.0N, only 0.5ml sample volume can be completed to complete the test, suitable for a variety of models of Viscometer host, to meet the measurement needs of different viscosity ranges.
Provides accurate viscosity values of 5.7cp, 400ml per bottle for Viscometer calibrated measurement Stability and Reliability.
Utilizing a wire-wound process, with a wet film thickness of 91.4 μm, a coating width of 300 mm, and durable stainless steel construction, the wire diaMeter of 1.02 mm ensures uniform coating, making it suitable for various surface treatments.
Complies with ISO 8502-3 standard, can assess the size and size of surface dust, ensure cleaning before lame plating, improve coating adhesion, suitable for passing test and long-term recording.
Using E Illuminant irradiation and 5 times reflection projection technology, Illuminant illuminance is not less than 1200X, measurement distinctness of image level from 0.1 to 2.0, suitable for detecting coating surface clarity.
The device can measure the ability of Coating to eliminate surface defects, wet film thickness range of 250~ 4000 μm, groove depth coverage of 250 to 4000 μm, in line with international standards.
Brass material Benchtop design, flow hole diaMeter 4mm, volume 100ml, in line with GB/T1723 standard, suitable for viscosity below 150s Coating detection, correction factor 0.97~ 1.03.
