Designed for Calcium Composite ElectRode, 250ml Standard Encasement is provided to ensure ElectRode calibrating accuracy and long-term Stability for a variety of analytical scenarios.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
ElectRode composite design without reference ElectRode, measurement range 0.002 to 69000ppm, circular Glass sensitive film accurate sensing Ion concentration, operation temperature range 5~ 80 ° C, anti-interference ions such as silver, lithium, potassium, titanium.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
The effective volume utilization rate of rectangular vacuum Chamber is high, each layer can be independently heated and vacuumed to inject nitrogen without interfering with each other, the temperature control accuracy is +/- 1 ℃, the Vacuum Level is 133Pa, and the double-decked tempered Glass door is easy to observe.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
The rectangular vacuum Chamber improves space utilization, the stainless steel studio is durable and easy to clean, the Vacuum Level 133Pa ensures efficient handling, double-decked tempered Glass doors are easy to observe, and over-temperature protection enhances safety.
ElectRode filling solution suitable for ammonia Gas sensing electRode maintenance, capacity 480mL, calcium ion type design to ensure measurement accuracy, prolong ElectRode life.
With programmed vacuum cycle control, it can set the range of 50~ 900Pa Vacuum Level, and the drying time is shortened by more than 50%; it adopts digital vacuum Meter automatic control, accuracy +/- 1%, and supports 7 groups of 63-step temperature programming.
The composite ElectRode design does not require reference ElectRode, the Solid State Sensor can be directly immersed in liquid measurement, the measurement range is 0.04 to 39000ppm, and the epoxy resin shell is durable.
Designed for Sodium Composite ElectRode, the 250ml Standard Encasement ensures calibrated Stability and provides accurate sodium concentration measurement for a variety of water quality monitoring scenarios.
1Mm Vacuum aperture diameter and 18mm hole spacing design, equipped with 176 adsorption holes to ensure that the substrate is flat and fixed, with 150W vacuum pump to achieve stable adsorption effect.
Using Platinum ElectRode, Glass Shell Structure, Temperature range 0-50 ℃, Dimension 12 * 120mm, BNC connector to ensure stable connection.
