Cantilever structure to prevent liquid infiltration, large proportion of chilled down surface uniform heat dissipation, Speed range 60~ 2000rpm, Max. Torque 1850gcm, suitable for viscosity of 10000mPa · s liquid stirring.
Impact speed 3.5m/s, cantilever beam impact energy 11J, semi-automatic control to improve operating efficiency, dedicated LCD screen real-time display of information, support printing output.
With the integrated structure of cantilever beam simply supported beam, the carbon fiber swing Rod realizes no vibration Impact, high test accuracy, can automatically save 24 sets of data and calculate the average value, and the impact energy range covers 1J to 5.5J.
Driven by micro motor, output power 120W, Max. Torque 52N.cm, with a wide Speed range of 60~ 2000rpm and 0~ 10000mPa.s viscosity processing capability, support quick chuck fixing.
The impact speed is 3.5m/s, the impact energy can be selected from 1J, 2.75J, 5.5J, and the pendulum lift angle is 150 °. It supports a variety of non-metallic material impact tests and is easy to operate.
High Accuracy swirl/spin encoder is used to collect angle and speed information, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 3.5m/s, and the pendulum energy can be selected from 1J to 5.5J to improve the test accuracy and efficiency.
Adopting semi-automatic control, the operation is simple and efficient; the impact speed is 3.5m/s, and the impact energy of the cantilever beam is 2.75J and 5.5J; the dedicated LCD screen displays data in real time, and the test results can be printed out.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Speed range is 300-23000 rpm, and the internal suction homogeneous structure can effectively homogenize, emulsify and extract. Stirrer can be used at low speed.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
Using electronic constant force speed control circuit, digital direct display Rotation speed, Power 500W, Speed range 100-2000rpm, low reliable operation noise, can calculate the relationship between stirring line speed and chemical reaction rate.
Adopt sealing solvent system to reduce water vapor interference, support 100 titration methods, Measurement range covers 1ppm to 5%, built-in automatic drift correction function, equipped with electronic adjustment Magnetic Stirrer.
Four-station independent operation does not interfere with each other, the brushless DC motor provides 12.5mN · M torque, temperature control accuracy of +/- 1 ℃, supports automatic temperature control function and stepless speed regulation of 0~ 1500rpm, to meet the needs of multi-sample synchronous processing.
