The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Using 470nm wavelength and double-sided LED Illuminant irradiation, equipped with amber filter and 105 * 163mm glue cutting area, accurate fluorescence sample separation operation can be achieved.
Adopting dip coating with double roll extrusion structure, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min can be slowly adjusted, built-in glue circulation system to ensure Spreader uniformity.
Film Film thickness 22.9μm, Spreader width 30cm, wear-resistant stainless steel material, molding process, suitable for low viscosity glue and thermal glue experimental Spreader.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
Using double-sided LED Illuminant and 400nm wavelength, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which is convenient for accurate separation of fluorescently labeled nucleic acid protein samples.
Using 365nm wavelength double-sided LED Illuminant, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which can clearly observe the fluorescence and accurately separate the target area.
The formed pRoduction process ensures that the film is uniform, the film thickness is 22.9μm, the application width is 300mm, which is suitable for low viscosity glue experiment, and the material is wear-resistant stainless steel to prolong the service life.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
The uniform glue speed is adjustable from 100 to 7000rpm, and the time is adjusted steplessly in multiple stages. The solenoid valve control gas path is suitable for the assembly line process. The motor torque is large and the operation is smooth. Vacuum chuck ensures the stability of the substrate.
The uniform glue time is up to 3000 seconds, the speed range is 100-10000rpm, and the acceleration is 100-10000rpm/s. The solenoid valve is used to control the air path, which is suitable for assembly line processes. The motor torque is large and the operation is smooth.
The uniform glue time can be adjusted from 0 to 240 seconds, the speed range is 100-7000rpm, the four-stage speed controller ensures the uniformity of the coating, the solenoid valve control gas path is suitable for the assembly line process, and the motor torque is large and the operation is smooth.
Support 0~ 10000rpm Rotation speed and 200 ℃ heating, with 5-stage uniform glue Linear dispersion programming function, PTFE cavity with dry mechanical pump to ensure process Stability.
Using the immersion coating method, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min, built-in glue circulation system to ensure uniform and stable Spreader.
The uniform glue speed and time can be adjusted steplessly in multiple periods, the motor torque is large and the operation is smooth, the solenoid valve control gas path is suitable for the assembly line process, and an air pump can work with multiple devices at the same time.
