Hall and magnetic eddy current principle to achieve dual mode measurement, accuracy of +/- (1μm + 2% reading), equipped with wear-resistant Ruby Probe and automatic flip screen, Measurement speed ≥ 100 times/minute, support statistical function.
Frequency of 710 vibrations per minute, mixing in 30 seconds; can handle 0.5 to 20 liters of barrel paint, equipped with safety interlock and height adjustment functions, quiet operation and easy loading.
Elliptical trajectory vertical vibration design, vibration Frequency 660 times/min, maximum load 30KG, equipped with automatic cooling down system to maintain sample temperature stability, closed structure to reduce noise and pollution risk.
Equipped with 2-inch color LCD display, operation temperature range -20~ 70 ℃, with automatic flip function and statistical calculation, Probe seat design to ensure measurement stability, support a variety of Probe selection to adapt to different application needs.
Equipment Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory movement to ensure that the sample test conditions independent equality, equipped with automatic chill down system to maintain temperature stability.
Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory motion to ensure that the sample test conditions are independent and equal, equipped with automatic chill down system to maintain temperature stability.
Using Hall and magnetic eddy current dual principle, Measurement accuracy +/- (1μm + 2% reading), equipped with wear-resistant ruby Probe, support automatic matrix switching and statistical functions, Operating temperature 0~ 50 ℃.
It has two LISHARU graphic motion track test modes, supports 60 × 40mm moving range, adopts 4 grinding head design, and the non-turning guide plate is convenient for sample loading operation.
Using three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, swing amplitude 35mm, can run continuously for a long time, Rotation speed monitoring and mild start function.
Measurement accuracy of 0.0001g/cm ³, support temperature compensation and solution compensation, can test the density and volume of solid, particle, float and other materials.
Servo motor to ensure stable operation, film accuracy of +/- 0.003mm, support 1~ 300mm/s stepless speed regulation and Vacuum chuck fixed, clamshell drawdown blade for quick cleaning and maintenance.
Mixing method using low speed intermittent sticking barrel edge, unique Impeller design makes the material thoroughly mixed by flipping shearing within ten minutes, the stirring process does not heat up, Rotation speed adjustable range 0~ 50rpm.
Mixing method of low speed intermittent sticking barrel edge, unique Impeller makes the material flip and cut, thoroughly stirring and not heating up within ten minutes, Speed range 0~ 50rpm adjustable.
The test time is about 5 seconds, the density accuracy is 0.0001g/cm ³, the temperature compensation and solution compensation are supported, and the built-in battery is convenient for on-site use.
Spreader accuracy of +/- 0.003mm, heating Temperature range RT +~ 180 ℃ and uniformity +/- 1 ℃, servo motor drive to ensure stable operation, support 1~ 300mm/s stepless speed regulation.
