Using halogen lamp heating source, moisture temperature accuracy +/- 0.5%, moisture readability 0.02%~ 0.1%, heating temperature range 50 ℃ to 180 ℃, support timing automatic end measurement, with RS232 communication interface.
Using halogen lamp heating technology, fast drying samples and real-time display Moisture content, Moisture Precision up to +/- 0.2%, Heating Temperature range 80~ 160 ℃, suitable for a variety of sample detection.
Ring quartz tungsten halogen infrared Heating mode is used to directly heat from the inside of the material, and a unique temperature control system is used to achieve uniform heating. With 0.02% moisture Readability and 50g weighing capacity, real-time monitoring of moisture changes ensures accurate results.
The annular halogen lamp uniformly heats the sample, Capacity 50g, Moisture measurement range is 0.00~ 100%, and the measurement is completed within a few minutes. The results are consistent with the Oven method and the efficiency is higher.
Conductivity Detector principle and temperature and humidity compensation technology, measurement accuracy of +/- 0.5%, Response Time of 1 second, integrated design supports on-site rapid detection, suitable for a variety of grain moisture measurement.
Ring quartz tungsten halogen infrared lamp is used for internal heating, with a unique temperature control system to achieve uniform heating, with 120g Capacity and 0.02% moisture readability, real-time monitoring of moisture changes and support for multiple sets of data storage.
Using electromagnetic wave detection technology, Measurement range 0~ 70%, accuracy 0.1%, Response Time is less than 1 second, with 10 kinds of code selection and temperature compensation function, suitable for a variety of materials moisture rapid determination.
Using halogen lamp heating technology, Capacity 110g, moisture readability 0.02%, with RS232C Communication interface, Heating Temperature range RT +~ 200 ℃, suitable for rapid drying analysis of various samples.
Imported chips ensure stable performance, 1 second Fast Response to complete the detection, measurement range 10-85%, resolution of 0.1%, suitable for all kinds of fresh meat moisture determination.
Measurement principle of resistance method, accuracy of +/- 1%, equipped with 610mm detachable long probe, can measure different depths of grain moisture, support voice broadcast and a variety of function settings, suitable for a variety of grain moisture detection.
Low-frequency signal penetration depth of 20mm, can simultaneously measure concrete carbide moisture content and plaster moisture content, built-in environment Sensor, support a variety of professional probe expansion measurement function.
Using an annular halogen lamp to heat uniformly, the sample is rapidly dried in just a few minutes, the moisture measurement range is 0.00 to 100%, and 9 paraMeters including water loss rate and temperature can be displayed.
Adopt non-light infrared NDIR Sensor, Response Time ≤ 15s, detection accuracy ≤ +/- 2%, support PPM,% VOL, mg/m ³ Unit switch, with overvoltage protection and automatic recovery function.
Adopt inductive nondestructive detection technology, measurement range 0~ 70%, accuracy +/- (0.5% n + 0.5), with LCD digital display and LED status indication, support USB, RS-232 and Bluetooth multiple data interfaces.
Using infrared detection principle, range 0~ 1000ppm, resolution 1ppm, Response Time T90 ≤ 20s, built-in 3800mAh battery, support Data storage and Humidity detection, simple operation.
