Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
A groove control film is formed on the smooth Rod body by extrusion process. The wear-resistant stainless steel material is not easy to break the wire and is easy to clean. The wet film thickness is 105.2 μ m and the application width is 300mm.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Using 0.06mm ultra-fine stainless steel wire, the wire diaMeter is thinner than the common 0.07mm in the market, the bristles are soft and can be deeply cleaned without damaging the roller surface, suitable for fine cleaning applications.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Using 0.06mm ultra-fine steel wire, soft bristles, effective cleaning of anilox rollers and Mayer Rods, to avoid surface damage, handmade to ensure mass.
Using 0.06mm ultra-fine steel wire, the bristles are soft, allowing for deep cleaning of anilox rollers and Mayer Rods to avoid surface damage, and are handmade by experienced craftsmen to ensure quality.
The wire-wound process ensures uniform coating application, with precise control of the wet film thickness at 57.2μm. The stainless steel material provides durability and easy-to-clean characteristics.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
Using 0.06mm ultra-fine steel wire, the bristles are soft and effective to clean without hurting the surface, the 6-line bristle design improves the cleaning efficiency, and the wooden base Film thickness 13mm ensures the operation stability.
Using 0.06mm ultra-fine steel wire, thinner than 0.07mm common in the market, the bristles are soft and do not hurt the roller surface; handmade to ensure mass, four lines of 62-hole design to improve cleaning efficiency, wooden base operation is stable.
Made of 304 stainless steel, with a wet film thickness of 200 μm and a coating width of 300 mm. The extrusion process ensures uniform coating, easy cleaning without clogging, and a long service life.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
