Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Spreader width 100mm, wet film thickness 37.5μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator to ensure coating conformity and Repeatability.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
The wet film thickness can be adjusted in 10 μm increments from 2 μm, the maximum application width is 250mm, and the precision wear-resistant stainless steel blade and anodic oxidation aluminum frame meet the requirements of ASTM D823 standard.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Adopt adjustable Blade Coating, high film thickness control accuracy, application length and speed can be adjusted freely, equipped with heat-resistant and scratch-resistant tempered Glass countertop, easy to clean and easy to operate.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
The wet film thickness can be adjusted in 10 μm increments starting from 2 μm, the maximum application width is 200mm, and it is equipped with a precision wear-resistant stainless steel blade and an anodic oxidation aluminum frame to meet the requirements of ASTM D823.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
The wet film thickness can be adjusted in increments of 10 μm from 2 μm, equipped with precision wear-resistant stainless steel blades, with a maximum application width of 150mm to meet the needs of accurate film thickness assessment.
The wet film thickness can be adjusted in increments of 10 μm from 2 μm, the maximum application width is 300mm, and the precision wear-resistant stainless steel blade and anodic oxidation aluminum frame are used.
Using bar coating method, accuracy of +/- 0.001mm, Spreader thickness range of 1~ 571.5μm, coating speed 5~ 200mm/s adjustable, Vacuum chuck design to ensure that the film is flat and flawless.
The wet film thickness can be adjusted in 10 μm increments from 2 μm, the maximum application width is 75mm, and the precision wear-resistant stainless steel blade and anodic oxidation aluminum frame meet the ASTM D823 standard.
