CATEGORIES

    High and Low Temperature Accelerated Aging Test Chamber

    Overview Products Knowledge Standards Terms
    The high and low temperature accelerated aging test chamber simulates the usage conditions of products in extreme temperature environments through heating and cooling systems, with air circulation inside the chamber ensuring uniform temperature distribution. It is used to detect changes in material performance under temperature variations, such as cracking of coatings and embrittlement of plastics, commonly applied in product quality verification and environmental adaptability testing.
    Selection
    When selecting, focus on ensuring the temperature range covers the actual usage limits, the heating and cooling rates match the testing standards, the internal chamber size accommodates the samples, and the control system accuracy ensures data reliability. Consider the equipment's energy consumption and maintenance costs, and refer to typical configuration cases of similar products in the industry.
    Aging Principle
    Control Mode
    Temperature Range
    Temperature Uniformity
    Air Exchange Method
    Specimen Category

    Terms

    High and Low Temperature Tensile Testing Machine
    High and Low Temperature Constant Temperature Circulating Bath
    Rapid Temperature Change High and Low Temperature Test Chamber
    High and Low Temperature Humidity Test Chamber
    High and Low Temperature Thermostatic Water Bath
    High and Low Temperature Constant Temperature Oil Bath
    Ultraviolet (UV) Aging Test Chamber
    Three-chamber High and Low Temperature Test Chamber
    Artificial Climate Accelerated Aging Test Chamber
    High and Low Temperature Weather Resistance Test Chamber

    Standards

    Active GB/T 9640-2008
    Flexible and rigid cellular polymeric materials - Accelerated ageing tests
    Active GB/T 41203-2021
    Method for accelerated aging test of PV module encapsulating material
    Active GB/T 44210-2024
    Nanotechnology—Silver nanowire conductive film accelerated aging test using xenon lamp
    Active GB/T 23595.8-2025
    Test methods of rare earth phosphors for LED—Part 8: Determination of pressure cooker test property
    Active GB/T 22894-2008
    Paper and board - Accelerated ageing - Moist heat treatment at 80℃ and 65% relative humidity
    Active GB/T 34179-2017
    Photovoltaic glass—Accelerated aging test method under multi-factor coupling conditions
    Active GB/T 16259-2008
    Test method for in accel erated weathering building materials
    Active GB/T 10590-2006
    Specifications for high and low temperature/low air pressure testing chambers
    Active GB/T 5170.10-2017
    Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments
    Active GB/T 10592-2023
    Specifications for high/low temperature testing chambers
    Active GB/T 40167-2021
    Paper and board—Accelerated ageing (100℃)
    Active GB/T 40166-2021
    Paper and board—Accelerated ageing (exposure to nitrogen dioxide)
    Active GB/T 40278-2021
    Paper and board—Accelerated ageing（exposure to light）
    Active GB/T 464-2008
    Paper and board - Accelerated aging - Dry heat treatment

    Instruments

    KESIONOTS KS-OTS-HD150LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 150L
    KESIONOTS KS-OTS-HD150LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 150L

    Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, suitable for high temperature and low temperature Reliability test, support aging test, in line with a number of national standards.

    $ 5947.00
    KESIONOTS KS-OTS-HD408LC low/high temperature test Chamber environmental test Chamber Temperature range -40~ 150 ℃
    KESIONOTS KS-OTS-HD408LC low/high temperature test Chamber environmental test Chamber Temperature range -40~ 150 ℃

    Temperature range -40~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high and low temperature cycle change test, suitable for material performance inspection and aging test, equipped with multiple safety protection devices.

    $ 6431.00
    AISRY NBC-HB150 yellow aging test chamber ultraviolet irradiation temperature control
    AISRY NBC-HB150 yellow aging test chamber ultraviolet irradiation temperature control

    300W yellowing resistant bulb provides 365-400nm wavelength ultraviolet, Temperature Uniformity +/- 1 ℃, can simulate the atmospheric environment accelerated testing, one machine multi-purpose support aging Oven function.

    $ 1272.00
    KESIONOTS KS-OTS-HD800LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 800L
    KESIONOTS KS-OTS-HD800LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 800L

    Temperature control range -40~ 150 ℃, volume 800L, Temperature Uniformity +/- 1.0 ℃, suitable for high temperature and low temperature cycle change test, support aging test and various standard verification.

    $ 7625.00
    KESIONOTS KS-OTS-HD80LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 80L
    KESIONOTS KS-OTS-HD80LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 80L

    Temperature range -40~ 150 ℃, studio volume 80L, Temperature Uniformity +/- 1.0 ℃, stainless steel studio and high efficiency refrigeration system, support high temperature and low temperature cycle test and aging simulation.

    $ 4705.00
    ZKHS QLH-100 ventilation aging test Chamber electrical insulation material heat resistance test
    ZKHS QLH-100 ventilation aging test Chamber electrical insulation material heat resistance test

    Adopt high temperature and low noise motor and multi-leaf centrifugal wind turbine, Temperature Uniformity +/- 2 ℃, equipped with low speed turntable, support 3~ 100 times/h ventilation volume adjustment, to meet a variety of aging test needs.

    $ 4463.00
    KESIONOTS KS-OTS-HD225LB low/high temperature test Chamber environmental test Chamber temperature control -60~ 150 ℃
    KESIONOTS KS-OTS-HD225LB low/high temperature test Chamber environmental test Chamber temperature control -60~ 150 ℃

    Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, suitable for high temperature and low temperature Reliability test, support aging test, in line with a number of national standards.

    $ 6254.00
    KESIONOTS KS-OTS-HD408LB low/high temperature test Chamber environmental test Chamber Industrial Reliability test
    KESIONOTS KS-OTS-HD408LB low/high temperature test Chamber environmental test Chamber Industrial Reliability test

    Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature and low temperature alternating cycle test, suitable for pRoduct design improvement and aging test, in line with a number of national standards.

    $ 6770.00
    KESIONOTS KS-OTS-HD1000LC low/high temperature test Chamber environmental test Chamber temperature control -40~ 150 ℃
    KESIONOTS KS-OTS-HD1000LC low/high temperature test Chamber environmental test Chamber temperature control -40~ 150 ℃

    Temperature range -40~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature and low temperature alternating cycle test, suitable for pRoduct design improvement and identification inspection.

    $ 8497.00
    KESIONOTS KS-OTS-HD800LD low/high temperature test Chamber environmental test Chamber Temperature range -20~ 150 ℃
    KESIONOTS KS-OTS-HD800LD low/high temperature test Chamber environmental test Chamber Temperature range -20~ 150 ℃

    Temperature range -20~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature and low temperature cycle change test, suitable for aging test and material performance inspection.

    $ 7109.00
    KESIONOTS KS-OTS-HD150LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 150L
    KESIONOTS KS-OTS-HD150LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 150L

    Temperature range -40~ 150 ℃, studio volume 150L, suitable for high temperature and low temperature Reliability test, in line with a number of national standards, aging test and constant temperature test.

    $ 5431.00
    KESIONOTS KS-OTS-HD80LA low/high temperature test Chamber environmental test Chamber -70~ 150 ℃ 80L
    KESIONOTS KS-OTS-HD80LA low/high temperature test Chamber environmental test Chamber -70~ 150 ℃ 80L

    Temperature range -70~ 150 ℃, studio volume 80L, Temperature Uniformity +/- 1.0 ℃, suitable for high temperature and low temperature cycle change test, support aging test and a variety of standard requirements.

    $ 5560.00
    KESIONOTS KS-OTS-HD150LD low/high temperature test Chamber environmental test Chamber temperature control -20~ 150 ℃
    KESIONOTS KS-OTS-HD150LD low/high temperature test Chamber environmental test Chamber temperature control -20~ 150 ℃

    Temperature range -20~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature, low temperature and constant temperature test, suitable for Reliability test, equipped with multiple protection devices and safety system.

    $ 4818.00
    KESIONOTS KS-OTS-HD225LD low/high temperature test Chamber environmental test Chamber Temperature range -20~ 150 ℃
    KESIONOTS KS-OTS-HD225LD low/high temperature test Chamber environmental test Chamber Temperature range -20~ 150 ℃

    Temperature range -20~ 150 ℃, volume 225L, stainless steel studio and high-efficiency insulation material, support high and low temperature cycle test, suitable for aging test and pRoduct performance inspection.

    $ 5399.00
    KESIONOTS KS-OTS-HD408LA low/high temperature test Chamber environmental test Chamber -70~ 150 ℃ 408L
    KESIONOTS KS-OTS-HD408LA low/high temperature test Chamber environmental test Chamber -70~ 150 ℃ 408L

    Temperature range -70~ 150 ℃, studio volume 408L, stainless steel studio and high temperature insulation material, support high temperature and low temperature Reliability test and aging test, Temperature Uniformity +/- 1.0 ℃.

    $ 7109.00

    Articles

    Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
    This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
    Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
    The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
    High and low temperature alternating test chamber for measuring low-temperature embrittlement temperature of plastics
    This article introduces how to use a high-low temperature alternating test chamber to determine the low-temperature brittleness temperature of plastics.
    Thermal Shock Test Chamber Measures Film's Temperature Change Resistance
    The thermal shock test chamber creates thermal stress inside the film by rapidly switching between high and low temperature environments, testing its resistance to temperature changes. During the test, key parameters such as temperature range and dwell time need to be set, and the film is observed for issues such as cracking or performance degradation.
    High Pressure Accelerated Aging Tester Evaluation of Paint Resistance to High Temperature, High Humidity, and High Pressure Environments
    This article introduces how a high-pressure accelerated aging test machine evaluates the durability of colored paint under high temperature, high humidity, and high-pressure conditions. The test machine simulates these conditions to accelerate the aging of the coating and observe whether issues such as discoloration or blistering occur.
    Evaluation of thermal aging life of hot melt adhesives using high-temperature oven method
    This article introduces a method for evaluating the thermal aging life of hot melt adhesives using a high-temperature oven. The principle is based on the Arrhenius equation, where aging is accelerated by increasing the temperature to simulate performance changes under long-term use.
    Thermal Shock Test Chamber Evaluates Coating Thermal Stability
    The thermal shock test chamber simulates sudden temperature changes by rapidly switching between high and low temperature environments, used to evaluate the thermal stability of coatings. In practical applications, coatings may develop internal stresses due to drastic temperature fluctuations, leading to issues such as cracking and peeling.
    UV aging test machine evaluates the UV resistance of ink.
    This article introduces how to test the UV resistance of ink using a UV aging test chamber. The equipment accelerates aging by simulating ultraviolet light and controlling temperature and humidity, with key testing conditions including temperature, irradiance, and cycle time.
    The necessity of explosion-proof high and low temperature test chambers in lithium battery testing
    Lithium batteries pose a risk of thermal runaway or even explosion when tested under extreme temperatures. Explosion-proof high-low temperature test chambers, designed with pressure relief structures, explosion-proof electrical components, and intelligent monitoring systems, can safely release energy and ensure the safety of the testing process.
    Tensile Testing Machine Evaluates High and Low Temperature Tensile Properties of Hot Melt Adhesive
    This article introduces how to use a tensile testing machine to test the tensile properties of hot-melt adhesives at different temperatures. The performance of hot-melt adhesives varies with temperature: they may soften at high temperatures and become brittle at low temperatures.
    The essential difference between thermal shock test chambers and high-low temperature alternating test chambers.
    Both thermal shock test chambers and temperature cycling test chambers are used to test the temperature resistance of products, but their core differences lie in the method and purpose of temperature change.