Temperature Color Change ThermoMeter Paper

Temperature-sensitive color-changing paper contains thermochromic materials that undergo physical or chemical changes when heated, causing a color shift. It displays the surface temperature of objects through color changes and is used to monitor the temperature conditions of electronic components, mechanical parts, and more.
Selection
When selecting, consider that the temperature measurement range covers the usage requirements, the color-changing accuracy meets monitoring needs, the substrate adapts to the shape of the measured surface, and note the influence of environmental humidity and contact time on the results.

Terms

Standards

Instruments

Provides 188 ℃ temperature history, irreversible color change, accuracy is +/- 1 ℃ within 100 ℃, oil and water and steam resistance, Instant Response and easy to use.

$ 98.00

Adopt irreversible color changing technology, accuracy +/- 1-4 ° C, oil and water resistance and steam resistance, provide four-grid temperature monitoring, size 23x45mm, 10 sheets each, easy to record temperature history for a long time.

$ 93.00

Four-grid temperature sensitive element with +/- 1 ° C accuracy below 100 ° C, providing irreversible Color change, oil, water and steam resistance, Instant Response to temperature changes.

$ 93.00

Using irreversible color technology, temperature accuracy +/- 1.5 ℃, Response instant, oil water and steam resistance, size 12 * 13mm circular single grid design, 50 sheets per book for easy use.

$ 96.00

Irreversible color change records the highest temperature, silver to black obvious change, accuracy +/- 4 ℃, oil water and steam resistance, Instant Response and easy to use.

$ 98.00

Color is irreversible after over-temperature discoloration, with recording function, Measuring temperature 138 ℃, Dimensions 12 * 12mm, suitable for temperature monitoring applications.

$ 81.00

Using irreversible discoloration method, Measuring temperature 99 ℃, easy to paste and gluing, Color change after overtemperature has recording function.

$ 81.00

Immediate Temperature Response with Irreversible Color Changing Technology, Measurement accuracy +/- 1 ° C to +/- 4 ° C, Resistant to Oil, Water and Steam, Provides Long-term Temperature Record for Easy Paste and Preservation.

$ 96.00

Color is irreversible after over-temperature discoloration, with recording function, Measuring temperature range 40 ℃ to 71 ℃, a total of 10 temperature grids, gluing and easy to paste.

$ 94.00

Color is irreversible after over-temperature discoloration, providing recording function, Measuring temperature 104 ℃, Dimensions 12 * 12mm, strong gluing and easy to paste.

$ 81.00

Using irreversible discoloration technology, providing 5-grid temperature measurement from 60 ° C to 82 ° C, Response is fast and oil and water vapor resistant, accuracy is +/- 1 ° C below 100 ° C.

$ 98.00

Color is irreversible after over-temperature discoloration, with recording function, Measuring temperature 43 ℃, strong gluing and easy to paste, Dimensions 12 * 12mm, in line with railway related technical standards.

$ 81.00

Using irreversible color change technology, accuracy below 100 ° C is +/- 1 ° C, Response is immediate, oil, water and steam resistance, suitable for a variety of environment monitoring.

$ 106.00

With 4 grid temperature monitoring window, size 12x40mm, full sealing protective film design, with waterproof and oil-proof function, temperature recording is irreversible, Color change can not be restored to the original state.

$ 145.00

Color is irreversible after over-temperature discoloration, with recording function, Measuring temperature 44 ° C, Dimensions 12 * 12mm, easy to paste and gluing, with reference to railway-related standards for pRoduction.

$ 81.00

Articles

Application of Laboratory Scraper Heating Coating Machine in Hot Melt Adhesive Coating
This article introduces the application of a laboratory blade heating coating machine in hot melt adhesive coating. It first explains the coating process and principles, including three stages—heat conduction, fluid shear, and surface wetting—as well as the influence of temperature on adhesive viscosity.
Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
Determination of Thermal Decomposition Temperature and Inorganic Filler Content in Ink by Thermogravimetric Analyzer
This article introduces how to determine the thermal decomposition temperature and inorganic filler content of ink using a thermogravimetric analyzer. During the test, a small amount of ink sample is heated in a nitrogen or air atmosphere, and the mass change curve is recorded.
Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
Temperature Oscillation Suppression in Reflux Synthesis Using Laboratory Stirring Heating Mantles
This article explores the causes and suppression methods of temperature oscillations in laboratory heating mantles during reflux synthesis.
Application of Transparent Constant Temperature Water Bath in Visualization of Material Thermal Deformation
The constant temperature water bath provides a stable environment for observing the deformation of materials after heating by maintaining a constant and uniform temperature of the liquid medium.
The impact of temperature uniformity in laboratory water baths on viscosity measurement
This article discusses the importance of temperature uniformity in laboratory water baths for viscosity measurement. Viscosity is highly sensitive to temperature variations, and uneven temperature distribution within the water bath can lead to deviations in measurement results.
The Impact of Cooling Circulating Water Chillers on the Temperature Stability of Digesters
The cooling circulator helps maintain a stable temperature for the digester by circulating the cooling medium, thereby improving the repeatability of experiments. Its working principle involves using a refrigeration system to lower the water temperature, and then circulating the cooled water to the digester through a circulation pump to absorb excess heat.
Guide to Selecting a Laboratory Rotational Viscometer for Coatings Development
This article introduces how to select a laboratory rotational viscometer in coatings research and development. It first explains the principle of rotational viscometers measuring viscosity based on shear resistance, and then points out that key parameters to consider during selection include measurement range, shear rate, temperature control, and rotor configuration.
High-temperature viscometer evaluates the flow characteristics of ceramic coatings before sintering.
This article introduces how to use a high-temperature viscometer to evaluate the flow characteristics of ceramic coatings before sintering. During measurement, the instrument detects changes in the viscosity of the coating sample under simulated sintering temperature conditions using rotational or oscillatory principles.
Temperature-controlled Rotational Viscometer Simulates Coating Rheology in Construction Environments
This article introduces how to use a temperature-controlled rotational viscometer to simulate construction environments in order to study the flow characteristics of coatings. The viscosity of coatings changes under different temperatures and shear conditions, which affects their application performance.
Rotation Speed of Sample Rack in Hot Air Aging Test Chamber on Color Fastness of Textiles
This article explores the influence of the rotation speed of sample racks in a hot air aging test chamber on the color fastness testing of textiles. The rotation speed affects the flow of hot air and temperature uniformity inside the chamber, thereby altering the heating conditions of the samples and leading to variations in color fastness results.
Temperature uniformity of high-temperature aging test chamber for UV resistance testing of inks
This article discusses how the temperature uniformity of high-temperature aging test chambers affects the accuracy of ink UV resistance testing. Temperature uniformity refers to the deviation in temperature at various points inside the chamber, with smaller deviations leading to more reliable test results.
Difference between Black Panel Temperature and Black Standard Temperature in Light Aging Test Chambers
In the light aging test chamber, black panel temperature and black standard temperature are two distinct temperature indicators. The black panel temperature is measured using a black metal panel sensor, reflecting the immediate heating effect on the material surface under light exposure and is significantly influenced by air convection.