The tire size of the instrument is Φ 241 +/- 6mm, weight 15.8 +/- 0.2kg, dedicated to marking Coating drying time test, easy to operate, accurate and reliable results.
The instrument uses 241 +/- 6mm tire uniform rolling detection, wet film thickness 200um +/- 20um, every 30 seconds, repeability test, accurate determination of non-stick tire drying time, suitable for marking Coating quality control.
Test voltage 100-600V adjustable, short circuit current 1A +/- 0.1A, using rectangular platinum plating ElectRode, drop time interval of 30 +/- 1 seconds, with automatic cut-off protection function.
Using digital High Accuracy dial head, Measurement range 0~ 12mm, Graduation up to 0.01/0 mm, with measurement safety locking mechanism and holding function, easy and reliable operation.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Fixed speed 2800RPM, eccentric spherical shaft design to ensure uniform mixing; TPU material work surface wear-resistant and corrosion-resistant, suitable for a variety of testtube specifications; compact size and low power consumption, suitable for long-term high-speed work.
Measurement range 0~ 12mm, accuracy of 0.01mm, using digital High Accuracy hundred (thousand) sub-Meter head, easy to operate and safe and reliable measurement, in line with GB/T 16311-2009 standard requirements.
The eccentric spherical shaft design ensures uniform mixing, and the fixed speed of 2800RPM realizes fast vortex mixing. The TPU material countertop is wear-resistant and corrosion-resistant, small in size and low in noise.
Using nylon mesh and weight combination test, equipped with 200g to 1000g multi-specification weight, can accurately detect the surface imprint condition after coating drying, in line with international standards.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Provide reference and working standard types, covering signs, markings and raised road signs, with a minimum effective reflective area of 50mm * 50mm, to meet a variety of Color and structural classification requirements.
Using swirl/spin design, light weight and easy to move, can effectively improve the Measurement accuracy and prevent the instrument from falling, suitable for small workpiece measurement scenarios.
Rotation speed of 2800RPM is fixed to ensure efficient mixing, TPU material work surface is wear-resistant and corrosion-resistant, with two operating Modes of pointing and continuous to meet different experimental needs.
White part reflectance 80 +/- 2, non-Laminating design to enhance paint wettability, test area of 0.1 square Meters, Curl and checking resistance, suitable for brushing applications.
The equipment supports 0.5-20 liters of barrel paint mixing, revolution speed 100-200rpm, rotation speed 200-400rpm, using multi-stage intelligent frequency conversion speed regulation and door opening and shutdown protection to achieve smooth operation and safe operation.
