150W Philips infrared lamp, peak wavelength 950nm, temperature measurement accuracy +/- 0.5 ° C, insulation accuracy +/- 2%, can quickly compare the insulation performance of different materials, the test time is only 1 minute.
The device uses mechatronics design, weight only 3.5kg easy to carry; equipped with High Accuracy S type Sensor, accuracy of 0.5% F.S; support 0.1-50 mm/min adjustable drawing speed, built-in lithium battery for outdoor use.
The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal thermal structure, the heating area is large and the temperature rises rapidly, and the thermal insulation effect is excellent; no open flame design avoids bruising Glass ware, the maximum operating temperature is 380 ° C, and the power is 1500W to support continuous work.
Measurement range 0-40000W/m ², Light spectrum Response 1000-1700nm, can automatically calculate and display infrared barrier rate, photosensitive aperture 10mm, suitable for performance testing of various Infrared sources and thermal insulation materials.
The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, the highest temperature of 380 ℃, heating area and rapid heating, excellent insulation effect, to avoid the risk of open flames.
Adopting high temperature resistant fiberglass insulation layer sealing resistance wire, the heating area is large and the heating is fast, the maximum operating temperature is 380 ° C and supports continuous work.
Using high temperature non-alkali fiberglass insulation material, the highest temperature 380 ℃, with internal and external dual Sensor temperature measurement function, large heating area and rapid heating, excellent thermal insulation effect.
Adopt high temperature resistant non-alkali fiberglass insulation layer sealing resistance wire, heating area is large and heating up fast, the maximum temperature of 380 ℃, support continuous Operating Mode, no open flame design to avoid Glass ware bruises.
Using high temperature non-alkali fiberglass insulation material, resistance wire sealing in the insulating layer, large heating area, fast heating, good thermal insulation effect, the highest temperature 380 ℃, power 4000W, no open flame design, not easy to bruise Glass ware.
The transient planar heat source method is used, the test time is not more than 160 seconds, the Sensitivity is 0.00001, and the thermal conductivity of 0.0001 to 50W/(m * K) can be measured. It supports a variety of morphological samples and meets international standards.
Four-channel K-type Thermocouple configuration, accuracy of 0.5%, insulation performance maintained at 400 ℃ for 60 minutes, support multi-rate sampling and data synchronization analysis, to ensure stable and reliable temperature mapping.
Adopting high-temperature non-alkali fiberglass insulation layer sealing resistance wire, the heating area is large and the heating is fast, the maximum operating temperature is 380 ℃, and the hemispherical internal thermal design avoids the danger of open flame.
Using high temperature non-alkali fiberglass insulation material sealing resistance wire, heating area and heating up quickly, the maximum temperature of 380 ℃, hemispherical inner thermal design to avoid bruising Glass ware, support Continuous Operating Mode.
Electric Circle-drawing is used to ensure uniform speed and constant strength, Travel 20-80mm adjustable, Rotation speed 10-120 +/- 1 rpm adjustable, equipped with automatic judgment prompts and precision dual rail system to improve test Repeatability and data accuracy.
Using two-box mobile Impact structure, Thermal Shock mechanism moves within 10 seconds, temperature recovery time ≤ 5 minutes, equipped with rigid polyurethane foam insulation material, effective energy saving and waterproof and moisture proof.
