1000 +/- 5g dead weight and 500 +/- 5g payload combined pressure, equipped with 20 times reading Microscope to achieve 0.1mm accuracy measurement, can quantify the anti-indentation performance of coatings and support plastic deformation analysis.
High Accuracy Position Sensor, indentation accuracy of 0.01mm, the maximum can be measured 1.25mm thick plate, automatic zero after the test without cumulative error, with 10 times magnifying glass for easy observation.
The weight load constant cutting force is used for automatic cutting, and the cutting is automatically stopped after completion. MicroMeter device can adjust the thickness of the sample cutting to achieve precision cutting. Spindle Rotation speed is adjustable from 50 to 800rpm, equipped with a chill down system to avoid sample burns, and the surface is bright and flat after cutting.
Test accuracy is ensured by using 500g payload and carbide circular tool, built-in horizontal bubble, and 20 times Microscope can accurately measure the size of the Crowd, with a reading accuracy of 0.1mm.
With 0.001mm High Accuracy and 1.0μm resolution, low pin pressure design and digital linear encoder, it supports multiple international standards for thickness measurement of various sheet substrates.
The indentation speed is adjustable 0.01-0 mm/s, the maximum indentation force is 5000N, equipped with emergency button and color touch screen, safe and convenient operation, suitable for a variety of material testing.
Built-in gearbox reduces manual force, indentation depth Display resolution 0.01mm, maximum indentation depth 15mm, suitable for a variety of standard tests, stable operation and high accuracy.
Using large torque stepper motor to achieve automatic reset to zero, indentation accuracy of 0.01mm, support 0.1-0 mm/s adjustable speed, through the indentation depth to determine the minimum depth of coating cracking or disengagement.
Cedar device weight 1Kg +/- 5g, Cedar load 500 +/- 5g, reading accuracy 0.1mm, in line with international standards, easy and reliable operation.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
Using 500 +/- 5g Cedar load and 0.1mm reading accuracy, the anti-indentation performance was measured by the reciprocal function of Cedar length, which was stable and easy to operate.
Punch diaMeter 20mm, indentation accuracy +/- 0.05mm, maximum depth 10mm, can measure the minimum depth of cracking or from the substrate of the coating, support single and double top coating test, equipped with digital display resolution 0.01mm.
