Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Equipped with a 1kg fixed load weight, pressing the specimen at a speed of 3.2mm/s, providing stability testing conditions, suitable for standard Hardness measurement, preventing vibration from affecting the results.
Resolution 0.1H, Accuracy ≤ 1H, Measurement range 10~ 90 HA/HD; Integrated design is lightweight, supports male/imperial conversion, average calculation and a variety of data output methods.
Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
Adopt DSP chip to realize fast data processing, support Multi-ParaMeter measurement such as Ra, Rz, etc., equipped with TYPE C and Bluetooth interface for data transmission, Continuous Operating Time exceeds 20 hours, and stores 100 sets of data.
Measurement range > 90C to < 20D, with MAX Maximum latch, automatic shutdown and data output functions, error ≤ 1H, support male/imperial unit conversion.
With 4-channel K-type Thermocouple, Measurement range -100 to 1300 ℃, accuracy +/- 0.3 ℃. Support continuous test 16 times, automatic charging when data is downloaded, and data is not lost after power failure, easy and intuitive operation.
Measurement range greater than 90B and less than 20D, with MAX Maximum latch, automatic shutdown and USB/Bluetooth data output functions, the error does not exceed 1H.
Impact energy is only 2.7mJ, minimal damage to the measured surface, does not damage the hardened layer, suitable for testing 1mm thickness of small parts, Cedar diaMeter minimum 0.32mm.
Equipped with adjustable Glass test plate and height adjustable fixing device, the test range is 0-100, Precision 0.006, suitable for accuracy repeability test of rubber and plastic pRoducts, easy to operate and labor-saving.
Measurement range greater than 90B and less than 20D, error ≤ +/- 1H, with average value calculation, MAX Maximum latch and automatic shutdown function, support USB, RS-232 and Bluetooth data output, suitable for portable use.
Tempered Glass platform, long-term use is not easy to abrasion and rust; the level of the working platform is adjustable, and the hardness Gauge is adjusted to the same level; the weight is accurate, the column lifting space is ≤ 140mm, Dimension 165 * 145 * 380mm.
Measurement range is 0~ 100HA, resolution up to 0.1HA, measurement error ≤ +/- 1HA (20-90HA), Ambient Temperature 0~ 40 ℃, Dimension 173 * 56 * 42mm, weight 233g, support RS232 communication cable.
