Multi-blade design is equipped with 6 cutter teeth, 1.5mm equal spacing arrangement, suitable for 50~ 125μm film thickness environment testing, to ensure cross-cutting accuracy in line with international standards.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
It can cut 140mmx25.4mm samples, sampling thickness ≤ 1mm, Operating temperature 20~ 40 ℃, suitable for auxiliary sampling of Internal Bond Strength test.
Using pneumatic adhesive sample pressing and automatic release, the test range is 0-1000J/M ², the accuracy is 0.001J/M ², the Z-direction failure energy is measured by pendulum Impact measurement, and the structural rigidity is strong to reduce energy loss.
The number of teeth is 11, the spacing is 1mm, and the single-sided simple cutter head design can be used for cross-cutting experiments. Standard two cutter heads are provided for easy operation.
11 tooth cutter design, 2mm pitch, single-sided simple cutter head, can carry out cross-cut experiment, test coating adhesion, in line with a number of international standards.
Equipped with 6 teeth 2mm pitch stainless steel cutter head, adjustable cutter head angle, suitable for 61-120μm film thickness test, with nylon brush and 2.5x magnifying glass, to meet a variety of international standards.
The number of teeth 6, spacing 3mm, using circumferential multi-faceted cutter surface design, long service life, suitable for film thickness greater than 120 μ m hard substrate test cross-cut.
Made of carbide steel, the number of teeth is 11, and the tooth spacing is 1mm to ensure accurate and even cross-cutting. The winger design improves cutting effect and durability.
Using high-performance ARM processor and 24-bit sampling chip, Measurement range 0-1000J/m ², accuracy < 1J/m ², with automatic testing and intelligent judgment functions, equipped with micro-printer real-time output data.
Equipped with three swirl/spin cutter heads, the tooth spacing is 1mm, 2mm and 3mm respectively, and it is designed according to ISO2409 standard for accurate evaluation of coating adhesion performance.
Adopting 6 cutter face circumference multi-face cutter tooth structure, the service life is significantly improved. The cutter tooth spacing is 1mm, which is suitable for the testing requirements of solid substrates with film thickness below 60μm.
Equipped with 11 teeth 1mm pitch stainless steel cutter head, suitable for 0-50μm film thickness test, adjustable cutter head angle, with nylon brush and 2.5x magnifying glass, to meet a variety of standard requirements.
The number of teeth is 6 teeth, the spacing is 2mm, and the multi-cutter surface circumference and multi-faceted design is adopted, which has a long service life and is suitable for 60 to 120μm hard substrate samples.
