Adopting pneumatic working mode, the test rate can be adjusted from 5 to 60 times per minute, with 4 independent test stations, capable of simultaneously testing switches and plugs and sockets, and supports current on-off and mechanical counting methods.
Two sets of Compressors are used to automatically switch to ensure long-term continuous operation, LED Illuminant has no thermal interference and has a lifespan of more than 30,000 hours. Programmable 30-stage program controls temperature Humidity Illumrination degree paraMeters.
The maximum temperature can reach 500 degrees Celsius, using imported energy adjustment switch to achieve Power stepless or stepwise adjustment, Furnace plate and heating wire die stamping to enhance heat energy emission, no open flame design to enhance operation safety.
Power stepless speed regulation is realized by using imported energy adjustment switch, the maximum temperature is 500 ℃, the Furnace plate and heating wire die are stamped to enhance heat energy emission, and the operation safety is improved without open flame contact.
LED non-thermal Illuminant to avoid thermal interference, two sets of Compressor automatic switching to ensure long-term continuous operation, Illumrination degree 0~ 18000LX six-level adjustable, program control temperature Humidity Illumrination degree, mirror stainless steel liner for cleaning and disinfection.
Using two sets of Compressor automatic rotation to ensure long-term operation, LED Illuminant without thermal interference and life over 30,000 hours, programmable control 30-stage program, light intensity 0-18000Lx six adjustable.
Equipped with six Illuminant configurations, including D65, TL84, CWF, F, UV, U30, etc., Illuminant automatically switches, no preheating and no flashing, low energy consumption and no heating, can display the use time and switching times, and supports Metamerism function.
Temperature range from -50.0 to 1350 ℃, support dual-line display real-time and maximum MIN Minimum, equipped with automatic shutdown and HOLD locking function, resolution of 0.1 ℃/1 ℃, adapt to a variety of environmental conditions.
Measurement range from 0.1 to 200000 Lux, Lux and FC Unit switch support, built-in MAX Maximum retention function, compact and easy to carry, ABS plastic housing to ensure durability.
With CAL Check ™ boot Self-check function, temperature range -20.0~ 80.0 ℃, accuracy +/- 0.3 ℃, in line with IP65 waterproof standard, suitable for a variety of environment measurement.
Using LED non-thermal Illuminant to avoid thermal interference, energy consumption is reduced by 80%; two sets of Compressors automatically switch to ensure long-term continuous operation; programmable control of temperature Humidity Illumrination degree and other paraMeters, support 30 program settings.
With Metamerism function, no need to warm up without flashing, including seven kinds of Illuminant including D65 (6500K) and UV (365nm), automatically switch Illuminant and display the use time.
Adopt photoelectric detection and microcomputer servo system, High Sensitivity, Measurement range +/- 45 °, Minimum reading +/- 0.001 °, Repeatability ≤ 0.002 °, LED display and membrane switch operation for easy reading, Cast aluminum base to ensure Stability.
With six types of Illuminants including D65 and UV, the seamless structure is designed to prevent light leakage, no preheating is required, and the energy consumption is low. It can automatically switch the Illuminant and record the use time and the number of switches.
High Accuracy measurement with 0.5% Relative Indication Error and 0.001N Graduation, support gravity acceleration setting, upper and lower limit alarm and 100 sets of data storage analysis, equipped with USB communication to realize force value Linear dispersion display.
