Winding speed 1-20R/min adjustable, free tension 25N-250N stepless adjustment, support 2-5mm diaMeter wire test, maximum output torque 40N.m, to meet the needs of different wire diaMeter detection.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
Using wire-wound design, uniform groove is formed by precision winding stainless steel wire, wet film thickness control accuracy reaches 4 μm, application width 220mm, to ensure uniform coating and repeability.
The equipment adopts dual-station synchronous unwinding and thermostatic hot pressing technology, the bonding speed is adjustable from 2-10m/min, the hot pressing temperature is room temperature to 200 ° C, the line pressure is 5-50N/mm, and it is equipped with automatic deviation correction and full closed-loop tension control to ensure the material alignment accuracy and stable winding.
Precision drawing stainless steel wire winding manufacturing, groove control wet film thickness accurate, repeatability, closed winding Spreader thickness of 4 to 120 μ m, spiral winding up to 500 μ m, diaMeter 9.5mm total length 570mm.
The equipment supports 400mm maximum Spreader width, Spreader thickness 0.01-2 mm adjustable, with forward and reverse stepless speed change and automatic winding function. The rubber groove and upper rubber wheel can be quickly disassembled and cleaned to adapt to different material tension control needs.
Precision drawing stainless steel wire winding manufacturing, groove pattern control wet film thickness accurate, repeatability, application width 420mm, closed winding structure is suitable for 4-120μm coating.
Precision drawing stainless steel wire winding manufacturing, groove shape consistent can accurately control the wet film thickness of 24 μ m, application width of 420mm, closed winding structure to ensure uniform coating, repeability.
Coating thickness is controlled by wire-wound process, wet film thickness reaches 100μm, application width 365mm, uniform groove is formed by precision stainless steel wire winding to achieve accurate Spreader.
Adopting a wire-winding process, with a wet film thickness of 107.4 μm, a total length of 400 mm, and a coating width of 300 mm. Made of durable and easy-to-clean stainless steel, it is suitable for high-viscosity applications, and features an ergonomic grip design for even pressure application.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
With 10-60 times/min adjustable speed rate and 10 ° -360 ° adjustable angle, supports 6-station synchronous testing, simulates the bending tensile stress of the wire through reciprocating rocking, and evaluates durability.
A wet film of 100.6 microMeters was prepared using a wire-winding process, with a coating width of 300 mm. The film thickness was precisely controlled using a steel wire with a diaMeter of 1.12 mm, and the extrusion process eliminated the need for wire winding.
The precision drawing stainless steel wire winding process is used to form uniform grooves to control the Coating thickness, the wet film thickness is 80 μ m, and the application width is 365mm to ensure the accuracy and repeability of the Spreader.
The precision drawing stainless steel wire winding structure is adopted, and the wet film thickness is precisely controlled by the groove. The closed winding design supports 4-120 μm coating, and the spiral winding can reach 500 μm thickness.
