Contains 1026 standard Colors, conforming to the National Standard for Architectural Color Representation Methods, displaying 6 color samples per page, suitable for architectural color selection and management.
The fan-shaped matte design contains 1188 standard colors, conforms to the national standard GB/T15608-2006, and provides a complete water-based paints formula system and colorants formula table. The colors are divided into seven series.
Contains 240 kinds of matte colors for interior and exterior walls, mainly ferric oxide exterior Color, providing a complete water-based paints formula, size 150mm * 50mm * 15mm, a total of 60 pages, 4 color blocks per page, easy to configure and control.
Matte design system Color, including 290 commonly used Colors, 5 color samples per page 3.1x5.0cm, convenient for industry color comparison and application reference.
The Fan Color Chart contains 1825 semi-matte Colors, with a color sample size of 2.5x5cm. It provides multi-language auxiliary name translation, and the upgraded model adds 200 new colors, which is convenient for industry color standardization applications.
The axial flow fan is used to supply air and support stepless speed regulation of 0~ 3m/s, and the anemoMeter has a range of 0~ 10m/s, which is suitable for the determination of the initial drying anti-cracking performance of laminated architectural coatings.
Contains 215 Colors, Fan-shaped design is easy to carry, color sample size 2.0x5.0cm, each page displays 5 Colors, bright type, widely used in Coating industry color comparison.
The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
The device provides 3 +/- 0.3m/s wind speed through axial flow fan in wind tunnel, Timer delay range of 0.01 seconds to 99 hours 99 minutes, can automatically control drying time and eye test plate surface crazing, support parallel test.
Using axial flow fan and test wind tunnel structure, the wind speed can be adjusted in the range of 3 +/- 0.3m/s, equipped with Timer delay range of 0.01 seconds to 99 hours and 99 minutes, automatic detection of material surface crazing.
Measurement range covering 55~ 140KU, suitable for accurate viscosity analysis of various coating samples.
Adopt 8 °/d illumination mode and Φ 4mm measurement diaMeter, chromatic value Repeatability Delta E * ab within 0.1, with Automatic calibration and moving Color Chart database function, support a variety of Color difference formula and Illuminant simulation.
With 450 +/- 2g brush weight and 300mm scrubbing Travel, scrubbing speed 37 +/- 2cpm, can accurately test the anti-scrubbing performance of coatings, suitable for interior and exterior wall coating inspection.
Contains 216 Classic Colors, color block size up to 5x15cm, single page monochrome design for accurate color matching, equipped with U-shaped protective cover to enhance durability, support industry standard color applications.
Equipped with 18 standard color scale solution, prepared according to GB/T1722-92 standard, using an inner diaMeter of 10.75mm Glass testtube, Color comparison is carried out in the Color Assessment Cabinet to ensure accurate measurement results.
