The digital vacuum Gauge is used to automatically control the Vacuum Level, with an accuracy of +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the special aluminum shelf conducts heat quickly and does not oxidize at high temperature, effectively improving the drying efficiency.
Vacuum heating drying technology, Vacuum Level up to -0.098MPa, pumping 80-120 liters/min, drying time is only 4-6 minutes, with intelligent PID temperature control and over-temperature alarm function, easy and safe operation.
Internal heating technology shortens the heating time by 50%, the vacuum environment can be reduced to 133Pa, the aluminum shelf conducts heat quickly and reduces heat loss, double-decked Glass doors are easy to observe, and support inert gas protection to prevent oxidation.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
Internal heating design shortens heating time by 50%, vacuum environment can quickly dry heat sensitive substances and avoid oxidation, Studio Temperature Fluctuation +/- 1 ℃, equipped with tempered Glass door for easy observation.
Cuboid Studio improves space utilization and shortens drying time by more than 40%; Double-decked Tempered Glass Door for easy observation, adjustable box door to ensure high Vacuum Level; Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa.
Shelf heating design in the box reduces heating time by 50%, aluminum shelf conducts heat quickly and does not oxidize at high temperature, Vacuum Level control accuracy of +/- 1%, can prevent sample oxidation in vacuum or inert gas environment.
Equipped with programmed vacuum cycle function, drying time is shortened by more than 50%, temperature control accuracy +/- 1 ℃, support 7 groups of 63-step Program settings, digital Vacuum Level control accuracy +/- 1%.
The cuboid studio improves the effective volume utilization rate and reduces the drying time by more than 40%; the box door is made of tempered bulletproof double-decked Glass for easy observation, and the studio is made of stainless steel, which is durable and easy to clean; Vacuum Level reaches 133Pa, Temperature range RT + 10~ 200 ℃.
The digital vacuum Gauge is used to automatically control the Vacuum Level, with accuracy +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the aluminum shelf conducts heat quickly and does not oxidize at high temperature; it can be filled with inert gas to prevent oxidation.
Cuboid Studio improves volume utilization, drying time is reduced by more than 40% compared with traditional Vacuum Chamber, Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa, double-decked Glass door is easy to observe.
Using Three-Box independent temperature control design, each layer can operate independently without interfering with each other, Vacuum Level up to 133Pa, equipped with stainless steel studio and double-decked tempered Glass door, temperature control accuracy +/- 1 ℃.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
The vacuum environment effectively reduces the boiling point of the liquid and prevents the analysis of heat-sensitive substances; the Vacuum Level < 133Pa ensures efficient drying; the microcomputer PID control realizes accurate temperature control; the multi-layer independent heating system makes the temperature distribution more uniform.
The vacuum environment reduces the boiling point of the liquid and the drying temperature is lower to protect the heat-sensitive substances; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the special aluminum shelf conducts heat quickly and does not oxidize at high temperature; it can be filled with inert gas to prevent sample oxidation.
