12.7Mm ultra-thin body and 250g lightweight design for easy portability; CAL-CHECK system can prompt ElectRode contamination and buffer information; Support 1000 sets of Data storage and USB interface transmission; Automatically identify ElectRode type and enter Measurement mode, suitable for a variety of environments.
Using clutter flying technology implementation of 0.15mm ultra-thin parts measurement, the highest resolution of 0.001mm, support through coating measurement and Bluetooth communication, with voice broadcast and LED backlight function.
Echo-echo technology implementation of 0.15mm ultra-thin part measurement, resolution of 0.001mm, can penetrate 0.5mm coating measurement substrate Film thickness, support sound speed calibrated and difference mode settings.
It adopts 12.7mm ultra-thin body design, is equipped with 5.5-inch large screen and 1000 sets of data storage capacity, supports automatic temperature compensation and ElectRode automatic identification function, and realizes convenient operation and accurate measurement.
With ultra-thin 12.7mm thickness and 250g lightweight design, equipped with 5.5-inch large screen and 150 ° viewing angle, supports 1000 sets of Data storage and automatic ElectRode identification, suitable for a variety of environment measurement.
Using clutter flying technology implementation of ultra-thin parts measurement, minimum Film thickness of 0.15mm, the highest resolution of 0.001mm, with two Measurement modes and through the coating measurement function, equipped with 15MHz single crystal delay probe.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using extrusion process and chrome plating surface, the wet film thickness can be as low as 1.5 μ m, and the groove design is wide to improve the Coating Weight, which solves the problem of traditional steel wire loosening and cleaning difficulties, and realizes stable ultra-thin Spreader.
Wet film thickness can be as low as 1.5μm, support ultra-thin Spreader; use extrusion process and chrome plating surface to reduce clogging and disconnection problems, groove design to optimize Coating Weight, adapt to a variety of substrate needs.
Linear dispersion surface is formed by cold extrusion processing technology, no risk of wire loosening, wet film thickness 50 μ m, can achieve ultra-thin film Spreader, smooth surface and easy to clean.
Spreader formed process ensures uniform, wet film thickness of only 1.5μm, to achieve ultra-thin film; stainless steel material is durable and easy to clean, suitable for precision Spreader applications.
Wet film thickness 1.5μm, formed pRoduction process and 304 stainless steel material, to ensure that the Spreader uniform durability, suitable for a variety of Coating application scenarios.
Adopting a wire-wound process, with a wet film thickness of 9.1 microns and a coating width of 300mm, it is suitable for ultra-thin coating requirements, offering high precision and ease of operation.
Using formed technology processing, wet film thickness 150 μ m, the total length of 610mm, surface without winding fine wire, to avoid loosening broken line, easy to clean, can be ultra-thin film Spreader.
Linear dispersion surface is processed by cold extrusion technology, no risk of wire loosening, support 2um ultra-thin film Spreader, smooth and easy to clean surface, suitable for 250mm length.
