Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Using S-type High Accuracy Sensor and mechatronics design, the range is 0~ 6.000KN, the accuracy is 0.5% F.S., the light alloy main body weighs only 2.8Kg, and the ultra-low power consumption works continuously for more than 200 hours.
Maximum load 0.5KN, specially designed for pull ring samples, compact structure, easy installation, suitable for tensile testing of a variety of materials, providing reliable data support.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Adopt built-in double column structure, support 500N maximum load and 0-500mm/min stepless speed regulation, with force holding function, four test modes and automatic counting Timing function, equipped with limit protection device to ensure safe operation.
Stepping motor and High Accuracy encoder ensure mechanical stability, displacement accuracy ≤ +/- 0.1mm, speed range 10-800mm/min, support force holding and pull-off stop function, equipped with limit and emergency protection device.
Using 14mm spindle diaMeter, Measurement range 0-45.5 MPa, with adjustable electric loading rate, support for pull-out force-time Linear dispersion display and large-capacity data storage.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Hollow self-resetting hydraulic cylinder design, maximum pull-out force 40kN, central aperture 18mm, digital pressure Gauge directly read the force value and with storage query function, simple operation suitable for on-site use.
Maximum pull-out force 50kN, center aperture 18mm, hollow self-resetting digital display integrated structure, can directly read the force value, with peak holding, storage, backlight and automatic shutdown functions, simple and reliable operation.
