Spreader speed 5-200mm/s adjustable, Spreader thickness range of 0.001-10mm, equipped with Vacuum chuck system to ensure the stability of the substrate, Touchscreen control to achieve accurate operation, improve film repRoducibility.
Spreader accuracy of +/- 0.003mm, thickness range of 0~ 10mm, coating speed 5~ 180mm/s, using stepless speed and Vacuum chuck design to ensure film repRoducibility and uniformity.
The 4-sided design can be prepared with four film thicknesses, application width 80mm, stainless steel material, suitable for water-based, acidic and alkaline pRoducts, high film accuracy and small size.
Using imported wire Rod accuracy of 1 μ m, Spreader rate 5~ 200mm/s adjustable, support scraper and wire Rod two Spreader mode, Heating Temperature Uniformity +/- 3 ℃, suitable for a variety of substrate Film thickness treatment.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Film speeds are adjustable from 1 to 150mm/s for A4 size charts. Equipped with replaceable Glass or perforated vacuum beds, compatible with standard block and spiral bar film applicators, Operating interface is simple and intuitive.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Spreader accuracy of +/- 0.001mm, coating speed 2~ 180mm/s stepless speed, removable drawdown blade easy to clean, heating Temperature Uniformity +/- 3 ℃, to ensure that the Spreader process is stable and efficient.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
Spreader width 100mm, wet film thickness 37.5μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator to ensure coating conformity and Repeatability.
Effective Spreader width 100mm, wet film thickness up to 600μm, high-quality wear-resistant corrosion-resistant alloy steel material, support manual film or with automatic Film Applicator to ensure good conformity Repeatability coating.
