Small hydraulic device to achieve masonry shear test, rated thrust 150KN, digital pressure Gauge direct reading, accuracy +/- 1%, detection of local damage, easy to operate.
Maximum shear force 1400N, upper and lower blade center spacing 2.2mm +/- 0.05mm, using high anti-interference 16-bit A/D analog-to-digital conversion circuit, with Data storage, peak holding and range setting functions, easy and fast operation.
Rated thrust 150KN, accuracy +/- 1%, equipped with 2.8 inch full touch LCD screen and Bluetooth printing function, can directly read shear force and store 200,000 data, support computer Connectivity view detection Linear dispersion.
Rated thrust 75KN, accuracy +/- 1%, using manual pump loading cylinder and digital pressure Gauge, can record the maximum pressure value, small size, easy to operate.
Rated thrust 75KN, accuracy +/- 1%, equipped with 2.8 inch Touchscreen and Bluetooth printing, can view data with computer Connectivity, small size weighing only 3kg, easy to operate.
Maximum compressire strength 50KN, platen size 1200 * 1200mm, with three test modes of compressire strength, stacking strength and fixed distance, support 7-inch Touchscreen operation and thermal printing function.
Range 320~ 320000000mPa · s, support 0.1~ 200rpm stepless speed change, LCD screen can simultaneously display viscosity, shear rate, shear stress and other sets of paraMeters, with a small number of sample adapters only 10-20mL sample volume.
Using 16-bit microcomputer processor and stepper motor high subdivision drive, the whole process of stepless variable speed and stable Rotation speed, Measurement accuracy of +/- 1% F. S, LCD screen can display viscosity, shear rate, shear stress, Rotation speed, temperature and torque and other paraMeters.
Measurement range 0-3000N, accuracy up to +/- 1% of the reading, equipped with 7-inch screen display test Linear dispersion, with automatic conversion of edge pressure strength, ring pressure strength and other functions, support data statistics and micro printing.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
The rotational speed range is 200-11000rpm, the processing capacity is up to 40L, and the precision-matched stator structure is used to achieve high-efficiency shear emulsification, which is suitable for the dispersion of various viscosity liquids and granular materials.
Using 316 stainless steel working head, Speed range 1000-13000rpm, maximum processing viscosity 8000mpa.s, with stepless speed regulation and real-time data display function, suitable for shear emulsification experiments of various viscosity liquids.
Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
Measurement accuracy +/- 1%, force value resolution 1/200000, with breakpoint ratio 0~ 99% adjustable function, support tensile, tensile shear, tear and other mechanical properties test, with Travel limit and overload protection.
