Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
1Mm Vacuum aperture diameter and 18mm hole spacing design, equipped with 176 adsorption holes to ensure that the substrate is flat and fixed, with 150W vacuum pump to achieve stable adsorption effect.
Ten station independent control design, each station Max. stirring Capacity 1000mL, stirring speed range 0~ 1500rpm, using brushless DC motor drive, Heating power adjustable within the rated range, suitable for small capacity multi station operation.
Four or six station design, each station independent control, Max. stirring Capacity 1500mL, stirring speed range of 100~ 2000rpm, brushless DC motor to provide stable drive.
Blade Coating method, coating speed 1~ 500mm/s stepless speed regulation, wire speed accuracy +/- 1%, equipped with Vacuum chuck and heating function, clamshell drawdown blade design for easy cleaning, support application length and speed free adjustment.
Adopt adjustable Blade Coating, Spreader thickness range 0~ 10mm adjustable, coating speed 5~ 200mm/s, with Platen Heating and Vacuum chuck function, improve film repRoducibility and operation convenience.
Using servo motor to ensure stable operation, coating speed 1~ 300mm/s stepless speed regulation, Blade Coating thickness range 0~ 10mm, with heating function Temperature Uniformity +/- 1 ℃, Vacuum chuck fixed substrate to improve film accuracy.
Temperature evenly distributed, ranging from Ambient Temperature to 125 ° C, accuracy up to 0.1 ° C, compatible with common coating Applicators, support Vacuum chuck fixed samples, power consumption 450W.
Equipped with a heated vacuum bed, the temperature can reach 100 ° C, the coating speed range is 0.1~ 500mm/s, Travel 415mm, supports a variety of film tools, and the intelligent interface simplifies the operation.
Utilizing a dual coating method with wire rod and doctor blade, the coating speed is adjustable from 1 to 300 mm/s with stepless speed control, ensuring high precision in film thickness control. Equipped with vacuum adsorption and heating functions, the temperature uniformity reaches ±1°C. The flip-top design facilitates easy cleaning.
The use of servo motors ensures stable operation and high precision in coating, featuring heating and vacuum adsorption functions, supporting free adjustment of coating length and speed, and a newly designed wire rod installation method for easy cleaning.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
DC brushless motor noise ≤ 27dB, four-station independent control can simultaneously stir different samples, temperature control accuracy +/- 1 ℃, heating surface corrosion resistant Teflon coating maximum temperature of 320 ℃, LCD digital display temperature and Rotation speed.
