Overview
The American RDS 7 #L1000φ 10 custom bar (also known as Metering rod) is a production bar, which is mainly used for Basis Weight control of fluids in the production process. For uneven pre-coating, this defect can be solved by this production type Metering rod. The production type Metering rod has a fixed groove formed to erase excess fluid, so as to achieve the effect of flat coating. The RDS 7 #L1000φ 10 production type bar is rated to prepare 16μm wet film thickness. The process is wire-wound and stainless steel is used, so Abrasion Resistance is better.
Features
1. The American RDS company has been focusing on the development of Spreader Measurement sticks for 80 years. It has a high degree of market familiarity and is used in most domestic industries. The market reputation is also very good;
2. Metering rod for production prefers stainless steel 303 by default, Abrasion Resistance is much higher than low-priced rod, and it is cheaper in cost accounting.
3. The Spreader Metering rod produced by RDS in the United States is very good in product process control, and its marked wet-film accuracy is high.
Principle
Production Metering rods have a fixed groove formed to remove excess fluid and achieve a flat coating effect.
Applications
Special paper Fine printing paper, Wallpaper, wall paints, wall materials, book covers, book covers, book covers, plastic film substrates Silicone release stickers, tape, tape, protective film, protective tape, Glass curtain wall film, thermal insulation film, window film (chromadizing and protection), photoelectric film (solar panels), pressure sensitive sheet, car logo, car sticker, Cardboard Encasement, projection screen, screen, display screen, thermal label sticker, thermal transfer color ribbon, ticket, label, cardboard, soft Encasement
Steps
1. Select the appropriate type of Metering rod according to the needs of the Spreader;
2. Install the Metering rod in the corresponding position of the Spreader equipment;
3. Adjust the Spreader parameters so that the Metering rod can evenly scrape off excess fluid;
4. Spreader production, Metering rod to form a fixed wet film thickness.
Notice
• The total length of this model bar is 1000mm, the diameter of the main rod is 10mm, the clamping length at both ends is 30mm, the effective Spreader width is 940mm, and the diameter of the steel wire is 0.18mm.
• The wire rod is production type, rated to prepare 16μm wet film thickness.
• For custom Miscellaneous specifications, use the bar custom ticker.
