Overview
LANDTEK SHS-1 (Type A, C) Shore Shore Durometer testing device rack is a special bracket specially designed for A/C type Shore Shore Durometer, which can help the hardness gauge to obtain the Hardness value of the measured object more stably and accurately. The rack performs hardness testing by configuring the corresponding fixed load weight on its upper end. The total mass of weight and hardness gauge used by Type A and C Shore Shore Durometer is 1kg.
Features
1. Specially designed for A, C type Shore Shore Durometer to ensure compatibility
2. Configure fixed load weight, total mass 1kg to ensure test accuracy
3. Provide stable support to reduce human error
4. A variety of types are available to adapt to different testing requirements
Principle
SHS-1 (A, C type) Shore Shore Durometer testing device holder by configuring the corresponding fixed load weight at its upper end, so that the hardness gauge is pressed against the sample at a maximum speed of 3.2mm/s under standard load, so as to stably and accurately measure Hardness value.
Applications
Vulcanized rubber hardness testing, thermal plasticity rubber hardness testing, shoe microporous hardness of materials testing
Standards
GB/T531.1-2008、HG/T2489-2007
Steps
1. Refer to SHS-1 (D type) Shore Shore Durometer testing device for operation
Notice
• Do not vibrate when using, the hardness gauge is pressed against the sample at a maximum speed of 3.2mm/s
• Adjust the test sample according to the standard
• Clean it in time after use to prevent rusting
