Overview
The YIHENG GHP-9050 Water-Jacketed thermostatic incubator is a water-jacketed Heating mode thermostatic device with a Temperature range of RT + 5 to 65 ° C with precise temperature control, Temperature resolution of 0.1 ° C, Fluctuation of +/- 0.3 ° C, Uniformity of +/- 0.5 ° C (at 37 ° C). It is designed to provide a stable temperature environment for experimental applications such as cell fostering.
Features
1. Humanized design: brushed stainless steel liner, four corners and half circle arc transition, shelf free loading and unloading, easy to clean; Water-Jacketed heating to ensure uniform temperature, can still maintain thermostatic after power failure; Glass door is easy to observe, open the door automatically suspend work.
2. Automatic control of circulating fan speed: automatically adjust the wind speed according to the temperature state to avoid sample volatilization.
3. LCD multi-stage programmable controller (with "N" model): multi-stage parameter one-screen display, menu operation, support temperature, wind speed, time and other programming, realize automatic control.
4. Safety function: independent temperature limit alarm system, sound and light alarm, support low temperature, high temperature, over temperature, water shortage and long door opening time alarm.
5. UV sterilization system (optional): can be regularly disinfected to prevent contamination.
Principle
The incubator uses Water-Jacketed (Water-jacketed) Heating mode, which evenly transfers heat through the water jacket to ensure a stable temperature in the studio. The microcomputer controller uses self-tuning PID technology to avoid temperature overshoot and automatically controls the circulating fan speed, reducing the wind speed in the thermostatic state to adapt to the needs of cell growth. When the door is opened, the system automatically pauses the heating and fan to protect the experimental sample.
Applications
Cell fostering, biological experiments, medical research
Steps
1. Connect the power supply to AC220V 50Hz.
2. Set parameters such as temperature and time (e.g. using a programmable controller).
3. Start the device and monitor the temperature status.
4. After the experiment, turn off the power.
Notice
• Ambient Temperature should be maintained at + 5~ 35 ℃.
• The device automatically pauses when opening the door to avoid opening the door for a long time.
• Regularly check the water level to prevent water shortage alarms.
• When selecting a UV sterilization system, disinfect it regularly according to the instructions.
• When installing and cleaning, pay attention to the safety of shelf loading and unloading.
