The KAIRDA KS100 Standard Probe is a Sensor accessory designed for KAIRDA Roughness Gauge for the measurement of asperity on planar and cylindrical surfaces. It is suitable for the measurement of the inner surface of the hole with a minimum aperture of 5mm and a maximum depth of 22mm.
Features
1, measurement of plane and cylindrical surface roughness
2. Suitable for hole surface measurement with a minimum aperture of 5mm and a maximum depth of 22mm
Principle
The KS100 standard Probe, as the Sensor component of Roughness Gauge, detects the surface profile of the workpiece through the contact Measurement mode, and converts the surface roughness signal into an electrical signal and transmits it to the host for analysis and processing.
Connect the KS100 standard Probe to the KAIRDA Roughness Gauge host
2, according to the measurement needs to select the plane, cylinder or hole surface Measurement mode
3. Probe contact with the surface to be measured for measurement
4. Read and record measurement results
Notice
• Make sure that the aperture is not less than 5mm when measuring the inner surface of the hole
• The depth of the measurement hole shall not exceed 22mm
• Can be used with extension rod or adapter rod as needed
Product name Standard Probe
application The measurement of planar and cylindrical surface roughness, when measuring the inner surface of the hole, the minimum aperture is 5mm, and the maximum depth is 22mm
[Q] Is the price listed on the website the final cost for overseas purchases?
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[Q] What is the specific process for purchasing the product?
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[Q] What should I do if the instrument I purchase needs repair?
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
