Overview
YONGCHAOMT D10-YC060-L400mm Experimental Spreader Metering rod is a long bar with a length of 400mm. It uses cold extrusion technology to process concave and convex wavy Linear dispersion on the surface of the steel rod to realize the Spreader function. The effective film width of the product is 310mm, the wet film thickness is 60μm, the product is made of 304 stainless steel and the surface is plated with hard chrome, which is wear-resistant, easy to clean, and has no risk of wire loosening.
Features
1. Using cold extrusion processing technology, the concave-convex wavy Linear dispersion is directly processed on the surface of the steel rod, replacing the traditional winding steel wire method, without the risk of loosening or breaking the steel wire.
2. Linear dispersion lubrication smooth, easy to clean.
3. The surface is plated with hard chromium hardness up to 1300HV, Abrasion Resistance, long service life.
4. Ultra-thin film Spreader can be realized.
Principle
The Spreader Metering rod uses a precision die to form a specific concave-convex wavy Linear dispersion structure on the surface of the steel rod through cold extrusion processing technology. When Spreader, the paint is transferred and spread to the surface of the substrate by the Linear dispersion structure Basis Weight to form a wet-film with uniform Film thickness. The principle is the same as that of the conventional steel wire winding bar, but the structure is more stable.
Applications
Experimental Spreaders, Coating R & D, inks Testing, Adhesive Spreaders, Functional coating prepatives
Steps
1. According to the required wet film thickness, refer to the model selection table to select the corresponding type of Metering rod.
2. Metering rod is placed on the substrate to be Spreader.
3. Spreader by smoothly pushing or pulling the Metering rod along the surface of the substrate.
4. After the Spreader is completed, clean the remaining paint on the surface of the Metering rod in time.
Notice
• Please select accurately according to the required wet film thickness.
• Spreader operation should be smooth and uniform to ensure film Film thickness conformity.
• After use, it should be cleaned thoroughly in time to keep the surface Linear dispersion structure clean and unobstructed.
• Be careful to handle it with care to avoid bumping and damaging the chrome plating on the surface.
• The grip area is 45mm wide at each end.
