Overview
The Bante901P-UK Portable Multi-Parameter water quality measurement instrument is a professional instrument for outdoor measurement of liquid pH/mV, conductivity and total dissolved solids (TDS) values. The instrument is equipped with a large screen backlit LCD display, supports multi-mode power supply scheme, expands the memory to store up to 500 sets of measurement data, and has a built-in clock to automatically mark the date and time of stored data to comply with GLP specifications.
Features
1. Multi-Parameter Water Quality Analyzer, integrated pH, mV, conductivity and TDS four measurement functions
2.pH mode supports 1 to 5 point button calibrate, automatic identification buffer, optional USA/NIST/DIN standard or custom calibrate
3.The conductivity /TDS mode supports 1 to 5 point calibrate, optional Electrode constant, TDS conversion factor and temperature compensation mode
4. Automatic temperature compensation, calibrating reminder, end point lock and Electrode diagnostic function
5. The system menu can customize 12 function parameters, and supports one-click reset to restore default settings
6. USB Communication interface to transmit data, multi-power solution to ensure continuous use
Principle
The meter detects liquid parameters by connecting pH Electrode, ORP Electrode or Conductivity detector Electrode, and uses automatic temperature compensation technology to ensure full-scale measurement accuracy. Electrode slope is automatically calculated in pH mode, linear and pure water temperature compensation are supported in conductivity mode, and the measurement data is displayed on the display screen after processing and can be automatically locked and stored according to the set conditions.
Applications
Water quality monitoring, environment testing, laboratory analysis, industrial process control, outdoor field measurement
Standards
GLP specification
Steps
1. Select the appropriate Electrode according to the Measurement parameters and connect the instrument
2. Select Measurement mode (pH/mV/conductivity /TDS) after power on
3. Perform 1 to 5 point calibrate, using the corresponding standard solution
4. Immerse the Electrode in the liquid to be tested and wait for the reading to stabilize
5. View automatic locking measurement results and store data if necessary
6. Transfer and store data to the computer through the USB interface
Notice
• Make sure to use the correct standard buffer or Conductivity detector before calibrating
• Make sure that the Electrode is fully immersed in the liquid to be tested and remains stable during measurement
• Electrode diagnosis is carried out regularly, and Electrode is replaced in time according to the slope prompts
• If you don't use it for a long time, it is recommended to turn off the power to prolong the Battery life
When storing data, pay attention to the accuracy of the built-in clock of the meter
• Clean Electrode in time after use and store it according to specifications
