Overview
The Bante931-Cd cadmium ion meter is a laboratory ion meter launched by the BANTE brand, suitable for the measurement of cadmium Ion concentration in liquid samples. The instrument has a 5-point button calibrate and automatic end point locking function. Measurement accuracy is 1% F.S., equipped with a large screen backlit LCD screen, supports direct reading of Ion concentration values, and does not require cumbersome conversion and calculation.
Features
1. Precision cadmium ion meter with large screen backlit LCD.
2.2 to 5 point button calibrated, optional 8 Ion concentration calibrated points.
3. Read the Ion concentration value directly to avoid cumbersome conversion and calculation.
4. Optional concentration units (ppm, mg/L, mol/L) to meet a variety of ion measurement needs.
5. Automatic temperature compensation to ensure accurate measurement within the full range.
6. Automatic calibration reminder, prompts the user to calibrate the meter regularly.
7. Automatic end point lock, keep stable Measured value for easy browsing or recording.
8. mV Measurement mode for calculating Electrode range to ensure measurement accuracy.
9. The system menu can customize the number of calibrated points, Ion concentration unit, Stability standard, data lock mode, automatic shutdown mode and other 8 functional parameters.
10. One-click reset (Reset), automatically restore the meter to the factory default settings.
11. Extended memory can store up to 500 sets of measurement data.
12. The built-in clock automatically marks the date and time of stored data to comply with GLP specifications.
13. USB Communication interface sends stored data to PC.
Principle
The Bante931-Cd Cadmium ion meter provides ion-selective Electrode measurement of Cadmium Ion concentration in liquid samples, combined with automatic temperature compensation technology to ensure measurement accuracy. The instrument calculates Electrode range in mV Measurement mode and calibrates and locks data with a built-in system for accurate Ion concentration analysis.
Applications
Cadmium Ion concentration measurement in laboratory liquid samples
Standards
GLP specification
Steps
Connect Cd-US Cadmium Ion Selective Electrode and TP-10K Temperature Probe.
2. Turn on the meter and select Ion Measurement mode.
3. Perform 2 to 5 point button calibrating, optional 8 Ion concentration calibrating points.
4. Immerse the Electrode in the liquid sample to be tested.
5. The instrument automatically performs temperature compensation and measurement, and the results are directly read and displayed.
6. Measured value with automatic end point lock, data can be stored manually or automatically.
7. Send the stored data to the personal computer through the USB interface.
Notice
• Make sure the meter is calibrated before use, the calibrated reminder can be set for 1 to 31 days.
• Electrode must be completely immersed in the liquid sample during measurement to avoid the influence of bubbles.
• Regularly check the status of the Ion Selective Electrode and Temperature Probes and replace them if necessary.
• The meter supports automatic shutdown mode, which automatically shuts down after 10, 20 or 30 minutes of no operation to save power.
• The data storage capacity is 500 sets, and old data needs to be exported or cleared when it exceeds.
• When making mV measurements, ensure that the Electrode Range Calculation is accurate to improve Measurement accuracy.
• Clean the Electrode after use and store it properly to prolong the life of the instrument.
