Overview
JZ-7 powder Tapped Density meter is a professional measurement equipment of JINGXIN brand, which is used for the measurement of powder Tapped Density and Loose Bulk Density. The instrument calculates the density by putting a certain amount of powder into a container and vibrating under certain conditions until the volume is no longer reduced. After reading the volume, the powder weight is divided by the volume. The instrument refers to the standard principle of GB5162-2006, which is similar to the US Pharmacopoeia and European Pharmacopoeia standards. It is composed of precision speed regulating motor, stainless steel guide frame, etc. The structure is firm and reasonable, and the operation is simple. The test data is managed by computer.
Features
1. Solid and reasonable structure, simple operation
2. Test data is managed by computer
3. Tested Powder Tapped Density and Loose Bulk Density
4. Equipped with precision speed control motor and stainless steel guide frame
5. Various Vibration Frequency and Test Time Options
6. Support multi-station and multiple measuringflask specifications
Principle
Based on the Tapped Density Measurement principle, the instrument loads a certain amount of powder into a container, vibrates under certain conditions until the volume of the powder in the container is no longer reduced, and then reads the volume of the powder, and divides the weight of the powder by the volume to obtain the density after vibration.
Applications
Industrial and agricultural production, scientific research institutions, battery materials, abrasives, ceramics, powder coatings, metal powder, food, chemical industry
Standards
GB5162-2006, American Pharmacopoeia, European Pharmacopoeia
Steps
1. Fill the powder into measuringflasks
2. Set Vibration Frequency and Test Time
3. Start the instrument to vibrate
4. Stop after observing that the powder volume no longer decreases
5. Read the volume data
6. Calculate density (weight divided by volume)
7. Manage test data through computer
Notice
• Power supply voltage AC220V +/- 22V 50Hz +/- 0.5Hz
• Select the appropriate measuringflask according to the test requirements
• Meet test requirements when setting vibration Frequency and time
• Check whether the instrument structure is firm before operation
• Test accuracy should be controlled within the range of < +/- 1%
