Overview
YT-CTM Folding tester is a Touchscreen folding resistance detection tool of YANTE brand, which is used to detect the folding fatigue performance of paper, Spinning & weaving products, Plastic film, wire and other products, and can measure the number of folds and folding resistance. The instrument is suitable for papermaking, Encasement, Spinning & weaving products, wire and other production enterprises, as a reliable tool for product mass inspection.
Features
1. Using high-performance stepper motor and driver, swirl/spin angle and folding speed are accurate and stable, and folding speed Accuracy is higher than standard requirements, up to 175 +/- 5 times/min.
2. The main board is designed with new technology, the CPU is a 32-bit ARM processor, the processing speed is fast, and the data calculation is accurate and fast.
3. Equipped with 5-inch color Touchscreen, Chinese display and touch buttons, the operation is simple and easy to understand.
4. Automatic measurement, statistics, printing test results, and data saving function.
5. Fully automatic measurement, with intelligent judgment function.
6. Using thermal printing movement, no inks and color ribbons, no noise, fast printing speed.
7. Equipped with a standard RS232 interface, it can communicate with microcomputer software (separately purchased).
Principle
Driven by a high-performance stepper motor, the instrument repeatedly folds the sample at a precise folding angle (135 +/- 2 °) and speed (175 +/- 5cpm) to measure its folding fatigue performance. The intelligent judgment function is used to automatically record the number of folds, and the data is quickly calculated by the ARM processor to achieve fully automatic detection.
Applications
0-1Mm paper, cardboard, Cardboard, 0-1mm fiberglass, film, circuit board, copper foil, cable, etc
Steps
Connect the power supply and ensure that the voltage is AC (100~ 240) V, (50/60) Hz.
2. Set parameters through the 5-inch color Touchscreen, such as folding angle, speed, etc.
3. Place the sample in the folding port and adjust the gap distance (optional 0.25mm/0.5mm/0.75mm/1.00mm).
4. Start the automatic measurement function, the instrument intelligently judges and records the number of folding times.
5. After the measurement is completed, the data is automatically counted and the results can be printed through the thermal printer.
6. Optional RS232 interface to connect to microcomputer software for data communication.
Notice
- Ambient Temperature should be maintained at 10~ 35 ℃, relative humidity below 85%.
Power supply voltage is checked before use to meet AC (100~ 240) V, (50/60) Hz requirements.
- Make sure that the gap distance of the folding mouth is set correctly to avoid damage to the sample.
- Maintain thermal printers regularly without adding inks or colored ribbons.
- Net weight of the instrument 17kg, pay attention to safety when handling.
- RS232 interface and microcomputer software need to be purchased separately, confirm compatibility before use.
