Overview
Lab Basket Grinder MXY-C4000-40 is an economical wet dispersion grinding equipment developed by MUXUAN brand for scientific research institutions and enterprises. The equipment can operate stably for a long time, with low noise, and complete two production processes of dispersion and grinding at the same time, which can effectively reduce the fineness of medium and low viscosity materials in a short time.
Features
1. High grinding efficiency, good product fineness, the highest Rotation speed 3000rpm, fineness can reach 10um or less, liquid-liquid dispersion grinding can reach sub-micron or even nano level.
2. Easy to operate, easy to clean, equipped with inverter control start and speed, manual or electric lifting device, solvent cycle cleaning, stainless steel design.
3. Small temperature rise, stable product, Mixing Tank with double-decked chill down jacket, conventional temperature rise is less than 10 degrees.
4. Strong non-standard, can be customized explosion-proof type, different materials (such as SS304, SS316L), adapt to high temperature, high voltage, flammable, explosive, corrosion and other working conditions.
Principle
When the motor of the laboratory electric lift basket sand mill is running, it drives the dial rod and the dispersion disc to swirl/spin at high speed, so that the negative pressure is generated in the ground body, which prompts the material to be forcibly sucked into the grinding cavity, and the collision and friction with the high-density zirconia beads continue to occur, so that the particle size of the material becomes smaller and the fineness is reduced.
Applications
Interior-wall latex paint, industrial paint, wood paint, various colorants, water-based oily inks, pesticide suspensions
Steps
1. Start the equipment and adjust to the required Rotation speed.
2. Adjust the basket position through the electric lifting device.
3. Set the grinding time to stop regularly.
4. Perform solvent circulation cleaning after grinding.
Notice
• Material viscosity should be ≤ 5000 cps (mPas).
• Grinding medium is zirconia beads, particle size 1.4~ 1.6mm.
• The equipment is non-explosion-proof, and it needs to be customized if there are flammable and explosive working conditions.
• Water chilled down during operation to control temperature rise.
• Use solvent circulation when cleaning.
