Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
The three-phase asynchronous motor is safe and spark-free, can handle high viscosity materials and support long-term continuous work, grinding basket volume 1.8L, speed range 0~ 3000rpm/min, to achieve efficient dispersion and refinement of grinding.
Full explosion-proof design to ensure safe operation, the main motor Power 22kW, grinding range 0-1450 rpm, equipped with 20L grinding basket and custom PTFE grinding sleeve, wear-resistant heat dissipation fast, hydraulic lift Travel 1200mm.
Rotation speed of the ball mill can reach 1100rpm, the minimum discharge particle size is 0.1μm. It supports dry and wet milling and various material Tanks, and the grinding is uniform and efficient.
Maximum feed size 2mm, minimum discharge particle size 0.1um, support dry grinding wet grinding vacuum grinding and other methods, equipped with a variety of materials ball mill Tank, can control Rotation speed and time to ensure grinding Repeatability.
Rotation speed of the ball mill can reach 850rpm, the minimum discharge particle size can reach 0.1μm. It supports dry grinding, wet grinding and other grinding methods, and has adjustable speed rolling and intermittent operation functions.
360 degree tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 80L, minimum discharge particle size 0.1μm, support dry grinding, wet grinding, vacuum and other grinding methods, equipped with a variety of materials ball mill Tank to adapt to different samples.
Core noise reduction technology is used to reduce operating noise. The rotation ratio of planetary disk and ball mill Tank is 1:2 to pRoduce a strong crushing force. The maximum Processing capacity is 6000ml and the discharge fineness is up to 0.1μm. It supports various grinding methods such as dry and wet grinding.
With 10L Processing capacity and 0.1μm discharge accuracy, four-station design and 580rpm Rotation speed, support wet and dry grinding and vacuum grinding, configuration 600CFM cooling system and a variety of materials ball mill Tank optional, good grinding conformity.
The equipment adopts a combined structure for easy maintenance, and is equipped with a 200CFM heat dissipation system and a low center of gravity design to ensure stable operation. The maximum Processing capacity is 60L, the minimum discharge particle size is 0.1μm. It supports four ball mill Tank stations and various grinding modes.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Rotation speed up to 3000rpm, fineness of grinding generally up to 10um or less, liquid-liquid dispersion ground up to sub-micron or even nano level; double-decked chilled down jacket design, conventional temperature rise less than 10º, to ensure pRoduct Stability.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
Rotation speed 3500rpm, fineness of grinding up to 10um or less, using zirconia beads and double-decked chill down jacket, temperature rise of less than 10 degrees, easy to operate and clean, can be customized lifting method and material.
