Overview
PUSHEN PS 2825 laboratory horizontal sand mill is a high-performance wet grinding equipment developed for the needs of universities, R & D institutions and factory laboratories, suitable for grinding of medium and low viscosity fluids. The equipment has the advantages of high grinding efficiency, good fineness of grinding and wide use range. It adopts stepless frequency conversion speed regulation, which can operate stably for a long time and has little noise.
Features
1. Continuously variable frequency speed regulation, speed regulation range 0~ 3000rpm
2. Can run stably for a long time with low noise
3. High grinding efficiency and fineness of grinding
4. Wide range of applications, suitable for medium and low viscosity fluids
5. Motor Power 2200W, grinding volume 0.5L
Principle
The equipment drives the grinding device through the motor, uses the grinding medium to wet grind the material, and controls the grinding speed through stepless frequency conversion speed regulation to achieve high-efficiency fineness grinding.
Applications
Universities, R & D institutions, factory laboratories
Steps
1. Connect the 220V AC 50HZ power supply
2. Select 0.8-2 grinding medium according to material characteristics
3. Set the required Rotation speed (within the range of 0~ 3000rpm)
4. Start the equipment for ground operation
5. Turn off the power after finishing the grinding
Notice
• Material viscosity must not exceed 5000cps
• Power supply voltage 220V AC 50HZ before use
• Select the appropriate grinding medium size (0.8-2)
• Device weight 88kg, pay attention to safety when handling
• Pay attention to observe the running status of the equipment during operation
