Overview
HUITAI LRH-150CB cryogenic incubator is a device specially designed for low temperature environment, widely used in storage foster, microbial foster, environmental testing and other fields. Temperature range is -40~ 65 ℃, volume is 150L, advanced Control system to ensure temperature Stability and uniformity.
Features
1. Humanized design: large-screen LCD display, multiple sets of data one-screen display, menu-type Operating interface is simple and easy to understand; use 134a without fluorine refrigerant, energy saving and environmental protection; mirror stainless steel liner, four corners and a half arc design is easy to clean, shelf spacing is adjustable; double-decked door structure has good thermal insulation performance; optional test hole is convenient for experimental operation.
2. Quality assurance: using brand Compressor, independent research and development of cooling system to extend life; JAKEL tube flow circulating fan and unique air duct to ensure Temperature uniformity; international brand Humidity Sensor and built-in water tank electric heating tube humidification system to ensure Humidity deviation is small; PID Control mode temperature and humidity control accurate; 99 cycle programs, 30 sections per cycle, 99 hours and 99 minutes per section, to meet the needs of complex experiments.
3. Optional function: independent temperature limit alarm system over temperature automatic interruption and sound and light alarm; data processing function optional USB or RS485 interface to connect the printer or computer to record temperature parameters.
Principle
The equipment is cooled by a brand Compressor and a self-developed cooling system, and uses PID Control mode to precisely adjust temperature and Humidity. The JAKEL tube flow circulating fan is combined with a unique air duct structure to form an air circulation system to ensure uniform temperature distribution in the box. The built-in water tank electric heating tube humidification system works in conjunction with Humidity Sensor to effectively control Humidity deviation.
Applications
Storage foster, microbial foster, environmental testing
Steps
Connect the power supply to AC 220V 50Hz/10A.
2. Set the temperature and Humidity parameters through the large-screen LCD display menu.
3. Adjust the shelf spacing as needed.
4. Start the device and monitor the running status.
5. Optional data processing function can be connected to the printer or computer to record parameters.
Notice
• Ambient Temperature should be kept at + 5~ 30 ℃.
• Power supply voltage meets AC 220V requirements before use.
• Regularly clean the liner to maintain performance.
• Optional accessories such as independent temperature limiting controllers need to be installed correctly to ensure safety.
• Pay attention to the alarm prompt when overheating and deal with it in time.
