Overview
HUITAI HQH-800 Artificial climate box can accurately simulate different environment climate conditions, and is widely used in microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, and insect and small animal feeding.
Features
1. Humanized design: large-screen LCD display, multiple sets of data one-screen display, menu-type Operating interface; use 134a without fluorine refrigerant; mirror stainless steel liner, four corners and half arc design is easy to clean, adjustable shelf spacing; double-decked door structure, good thermal insulation performance.
2. Quality assurance: brand Compressor, self-developed Compressor cooling system; JAKEL tube flow circulating fan and unique air duct structure; international good brand Humidity Sensor, built-in water tank electric heating tube humidification system; three-sided lighting design, T4 incubator special lamp; Microcomputer control temperature, Humidity and illumination; PID Control mode; 99 cycle programs, 30 cycles per cycle, 99 hours and 99 minutes per cycle.
Continuous Operating Technology: Long-term continuous operation, Continuous Operating Time is not less than 360 hours.
4. Independent temperature limit alarm system (optional): If the temperature exceeds the limit, the operation will be automatically interrupted, and the sound and light alarm will be issued.
5. Convenient data processing (optional): USB or RS485 interface, which can be connected to a printer or computer to record temperature parameter changes.
Principle
Artificial climate box accurately adjusts temperature, Humidity and illumination through microcomputer Control system, adopts PID Control mode to reduce fluctuations, and uses Compressor cooling system, circulating fan and humidification system to achieve stable environment in the box. The lighting system adopts three-sided design and T4 lamp tube to ensure uniform no dead angle.
Applications
Microbial tissue cell fostering, seed germination, nursery experiments, plant cultivation, insect and small animal feeding
Steps
Connect the power supply to AC 220V 50Hz/16A.
2. Set Temperature, Humidity and Illuminance parameters through the Menu Operating interface.
3. Adjust the shelf spacing as needed.
4. Start the device and monitor the running status.
5. Optional connection to a printer or computer for data recording.
Notice
• Ambient Temperature should be maintained at RT + 5~ 30 ℃.
• Power supply voltage meets requirements before use.
• Clean the liner regularly to avoid accumulation of dirt.
• When selecting an independent temperature limit alarm system, pay attention to the alarm setting.
• When running continuously for a long time, monitor the status of the equipment to prevent accidents.
The light intensity can be adjusted according to the experimental requirements.
