Overview
HUITAI HQH-800N Artificial climate box is a device used to simulate different environment climate conditions, which is widely used in the fields of microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, and insect and small animal feeding.
Features
1. Large-screen LCD display, multiple sets of data are displayed on one screen, and the menu-type operation interface is simple and easy to understand.
2. Use 134a without fluorine refrigerant, energy saving and environmental protection.
3. There is a 25mm diameter test hole on the left side, which is convenient for experimental operation and temperature measurement.
4. The wind speed of the fan is adjusted by speed and speed to prevent the sample from losing moisture too quickly.
5. Instrument control is placed in the upper left corner of the door panel to save space.
6. The interior comes with a miniature water inlet pump, which precisely controls the amount of water and makes little noise.
7. Mirror stainless steel liner, four corners and half arc design is easy to clean, shelf spacing is adjustable.
8. Double-decked door structure, good thermal insulation performance, does not affect the temperature in the box when observed.
9. The surface of the box is sand blasting, which is not easy to scratch and easy to clean.
10. Adopt brand Compressor and self-developed cooling system to prolong Compressor life.
11. JAKEL tube flow circulating fan and unique air duct structure ensure temperature uniformity.
12. International brand Humidity Sensor and built-in water tank electric heating tube humidification system to ensure humidity deviation.
13. Standard LED light source, can be divided into 10 levels of dimming, Illuminant direction vertical, Illuminant board removable.
14. Microcomputer control Temperature, Humidity, Illumrination degree, Temperature can be set day and night with light.
15. PID control mode, accurate control of small fluctuations.
16. With 99 cycles, 30 cycles per cycle, each cycle is 99 hours and 59 minutes.
17. Can run continuously for a long time.
18. Optional independent temperature limit alarm system, automatic interruption and sound and light alarm when the temperature exceeds the limit.
19. Optional USB or RS485 interface can be used to connect a printer or computer to record temperature parameters.
Principle
The temperature, humidity and illumination are precisely adjusted by the microcomputer control system, and the PID control mode is adopted to reduce fluctuations. The equipment uses a Compressor cooling system and an electric heating tube humidification system, combined with the fan and air duct structure to achieve uniform air circulation, simulating different climate conditions.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect feeding, small animal feeding
Steps
1. Set parameters through large-screen LCD display and menu-type operation interface.
2. Adjust the wind speed gear of the fan to prevent moisture loss of the sample.
3. Use an internal micro-inlet pump to control the amount of water.
4. Adjust the light level and cycle program as required.
5. Optional connection to a printer or computer to record data.
Notice
• Ambient Temperature should be maintained at RT + 5~ 30 ℃.
• Power frequency check before use is AC 380V 50Hz.
• Prevent the sample from failing the experiment due to excessive moisture loss, and adjust the wind speed reasonably.
• Use a double-decked door structure when observing the inside of the box to avoid affecting the temperature.
• Optional independent temperature limit alarm system to ensure experimental safety.
• Regularly clean the mirror stainless steel liner and cabinet surface.
