Overview
HUITAI HQH-400N Artificial climate box is a device used to simulate different environment climate conditions, which is widely used in the fields of microbial tissue cell fostering, seed germination, seedling test, plant cultivation, and insect and small animal feeding.
Features
1. Large-screen LCD display, one-screen display of multiple sets of data, menu-style operation interface, simple to understand and easy to operate.
2. Use 134a without fluorine refrigerant, energy saving and environmental protection.
3. There is a 25mm diameter test hole on the left side, which is convenient for experimental operation and temperature measurement.
4. The wind speed of the fan is adjusted by speed and speed to prevent the sample from losing moisture too quickly.
5. Instrument control is placed in the upper left corner of the door panel to save space.
6. The interior comes with a miniature water inlet pump, which precisely controls the amount of water and makes little noise.
7. Mirror stainless steel liner, four corners and half arc design is easy to clean, shelf spacing is adjustable.
8. Double-decked door structure, good thermal insulation performance, observation does not affect the temperature in the box.
9. The surface of the box is sand blasting, which is not easy to scratch and easy to clean.
10. Adopt brand Compressor, independent research and development of cooling system, prolong Compressor life.
11. JAKEL tube flow circulating fan and unique air duct structure ensure temperature uniformity.
12. International brand Humidity Sensor, built-in water tank electric heating tube humidification system to ensure humidity deviation.
13. Standard LED light source, can be divided into 10 levels of dimming, vertical Illuminant, Illuminant board removable.
14. Microcomputer control temperature, humidity, Illumrination degree, temperature can be set with light day and night different.
15. PID control mode, accurate control of small fluctuations.
16. With 99 cycles, 30 cycles per cycle, each cycle is 99 hours and 59 minutes.
17. Can run continuously for a long time.
18. Optional independent temperature limit alarm system, automatic interruption and sound and light alarm when the temperature exceeds the limit.
19. Optional USB or RS485 interface is available to connect a printer or computer to record data.
Principle
The equipment precisely adjusts temperature, humidity and illumination through a microcomputer control system, and adopts PID control mode to reduce fluctuations. Cooling is achieved using brand Compressor and 134a without fluorine refrigerant. JAKEL tube flow circulating fan and unique air duct structure ensure uniform air circulation and temperature in the box. Humidity control is realized through international brand Sensor and built-in water tank electric heating tube humidification system. The light is provided by LED light source, which can be divided into 10 levels of dimming. Optional independent temperature limit alarm system, automatically interrupts operation and alarms when it exceeds temperature.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect feeding, small animal feeding
Steps
1. Turn on the power supply and set the temperature, humidity and lighting parameters.
2. Adjust the fan wind speed gear as required.
3. Use test holes for experimental operation and temperature measurement.
4. Optional independent temperature limit alarm system to set temperature limit.
5. Optional USB or RS485 interface can be used to connect external devices to record data.
6. Start the device and monitor the running status.
Notice
• The wind speed of the equipment fan can be adjusted to prevent the sample from losing moisture too quickly.
• Use a double-decked door structure when observing the inside of the box to avoid affecting the temperature.
• Regularly clean the mirror stainless steel liner and cabinet surface.
• When an independent temperature limit alarm system is optional, make sure it is set correctly to avoid accidents.
• Ambient Temperature should be kept in the range of RT + 5~ 30 ℃.
• The light intensity is adjustable, and the appropriate level is set according to the experimental requirements.
