Overview
HUITAI HQH-150N Artificial climate box is a device used to simulate different environment climate conditions, which is widely used in microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation and insect and small animal feeding experiments.
Features
1. Humanized design: large-screen LCD display, one-screen display of multiple sets of data, menu-style operation interface, simple and easy to understand, easy to operate.
2. Environmental protection and energy saving: the use of 134a without fluorine refrigerant, effective energy saving, environment friendly.
3. Experiment convenience: There is a 25mm diameter test hole on the left side, which is convenient for experimental operation and temperature measurement; the wind speed of the fan is adjusted by speed and slow gear to prevent the sample from losing too much moisture.
4. Structural optimization: the instrument control of the whole machine is placed in the upper left corner of the door panel, saving space; the interior comes with a micro water inlet pump, precise control of water volume, low noise; the mirror stainless steel liner, the four corners and a half arc design is easy to clean, and the shelf spacing is adjustable; double-decked door structure has good thermal insulation performance, and the observation box does not affect the temperature; the surface of the box is sand blasting, which is not easy to scratch and easy to clean.
5. Quality assurance: using brand Compressor, independent research and development of cooling system, prolong Compressor life; JAKEL pipe flow circulating fan and unique air duct structure to ensure temperature uniformity; international brand humidity Sensor and built-in water tank electric heating tube humidification system, effective control of humidity deviation.
6. Intelligent control: Standard LED light source, can be divided into 10 levels of dimming, vertical Illuminant, detachable Illuminant board; Microcomputer control temperature, humidity, Illumrination degree, temperature can be set day and night with light; PID control mode, control accurate fluctuations.
7. Advanced features: With 99 cycles of programs, each cycle is divided into 30 segments, each 99 hours and 59 minutes of cycle steps, to meet complex experiments; long-term continuous operation.
8. Safety and expansion: independent temperature limit alarm system (optional), automatic interruption and sound and light alarm over temperature; convenient data processing (optional), USB or RS485 interface can be connected to printer or computer to record parameters.
Principle
The equipment precisely adjusts the temperature, humidity and illumination through the microcomputer control system, and adopts the PID control mode to ensure the stability of the parameters. Using the Compressor cooling system and the electric heating pipe humidification system, combined with the air duct circulation structure, the uniform simulation of the environment in the box is realized. The lighting system can be adjusted in stages and supports different settings of day and night to meet the experimental needs.
Applications
Microbial tissue cell fostering, seed germination, nursery experiments, plant cultivation, insect and small animal feeding
Steps
Connect the power supply and ensure that the voltage is AC 220V 50Hz.
2. Open the device and set parameters such as temperature, humidity, and Illumrination degree through the large-screen LCD display menu.
3. Adjust the fan wind speed gear (fast or slow) as required.
4. Use the test hole for experimental operation or temperature measurement.
5. Set the program cycle and number of segments, and start running.
6. Monitor the running status, optionally connect a printer or computer to record data.
Notice
• Ambient Temperature should be kept in the range of RT + 5~ 30 ℃.
• Power frequency check before use meets AC 220V 50Hz requirements.
• When adjusting the wind speed of the fan, pay attention to prevent the sample from losing moisture too quickly.
• Regularly clean liner and box surfaces to avoid scratches.
• When selecting an independent temperature limit alarm system, ensure that it is installed correctly to avoid accidents.
• Long-term operation requires monitoring of equipment status to prevent overheating or malfunction.
