Overview
The LANDTEK VM-6370 Vibration Meter (Enhanced) is an instrument designed for on-site measurement of various mechanical vibrations. It is used for periodic motion measurement to detect imBalances and deviations in moving machinery, providing data for quality control, running time and prior equipment maintenance.
Features
1. Acceleration, speed and displacement parameters can be displayed at the same time
2. In line with international standards ISO2954
3. High-performance accelerometers for accurate, reproducible measurements
4. Frequency range, Acceleration mode Frequency up to 10Hz~ 10kHz
5. With AC signal output for auscultation and recording
6. Optional headphones can be used as a stethoscope
7. Use USB data cable output and RS-232 data cable output to communicate with PC
8. Provide Bluetooth data output selection
Principle
The Piezoelectric Vibration Sensor detects mechanical vibration signals, converts vibration into electrical signals for processing and analysis, and can simultaneously measure Acceleration, Speed and Displacement parameters, and output measurement results through the Interface.
Applications
Periodic motion measurement, mechanical vibration detection, quality control, equipment maintenance
Steps
1. Install 4 AA batteries
2. Select Measurement mode (Acceleration, Speed or Displacement)
3. Contact the Sensor with the mechanical surface under test
4. Read the measurement data on the display
5. Optional headphones for auscultation analysis
6. Transfer data to PC via USB, RS-232 or Bluetooth interface
Notice
* Operating temperature range is 0~ 50 ℃
* Operating humidity should be less than 90% RH
Make sure the Sensor is in good contact with the tested surface
Regularly check the battery level
* Avoid use in strong electromagnetic interference environments
* Frequency range is set correctly before measurement
