Overview
The SMART SENSOR AS63B is a split vibrometer for vibration measurement using a piezoelectric ceramic Acceleration Meter. Acceleration, speed and displacement measurement is available with automatic range switching, backlit display and automatic shutdown for industrial equipment vibration detection.
Features
1. Acceleration measurement mode
2. Acceleration Measurement range 0.1~ 199.9m/s ²
3. Measurement range 0.1~ 199.9mm/s
4. Measurement range 0.001~ 1.999mm
5. With automatic switching range function
6. Equipped with backlight display function
7. Support automatic shutdown function
8.3.5 digits LCD display
9. Aluminum Encasement for Portability and Protection
Principle
Acceleration meter senses vibration signal and converts mechanical vibration into electrical signal. The internal circuit of the instrument processes and analyzes the signal, and measures Acceleration, Speed and Displacement parameters in different Frequency ranges, and finally displays the measurement result through LCD display screen.
Applications
Industrial equipment vibration detection, Machinery condition monitoring, swirling/spinning machinery vibration analysis
Standards
Measurement error +/- 5% Hz +/- 2digits
Steps
1. Install a 9V battery
2. Connect Piezoelectric Ceramic Acceleration Meter
3. Measurement mode (Acceleration/Speed/Displacement)
4. Fix the Sensor on the surface of the object to be measured
5. Read the measurement data on the LCD display
6. Automatic shutdown after use
Notice
• Operating temperature range 0~ 40 ℃
• measurement error of +/- 5% Hz +/- 2digits
• Pay attention to the battery power and replace it in time
• Ensure that the Sensor is in good contact with the measured object when using
• Avoid use in environments beyond the specified Temperature range
