Overview
The LANDTEK VM-6380-3 Vibration Meter (3-channel) is an instrument designed for on-site measurement of various mechanical vibrations. It is used for periodic motion measurement to detect imBalances and deviations in moving machinery, providing data for quality control, running time and prior equipment maintenance.
Features
1. The same parameter on two measurement points can be displayed at the same time, or three parameters on any measurement point (Acceleration, Speed, Displacement).
2. Conforms to the international standard ISO2954 for periodic motion measurement to detect imBalances and deviations in moving machinery.
3. Designed for on-site measurement of various mechanical vibrations to provide data for quality control, operating time and prior equipment maintenance.
4. Select high-performance accelerometers to achieve accurate and reproducible measurement.
5. Frequency range is wide, in Acceleration mode, Frequency can reach 10Hz~ 10KHz.
6. With AC signal output, it is convenient for auscultation and recording.
7. Optional headphones can be used as a stethoscope.
8. Use "USB data cable output" and "RS-232 data cable output" to communicate with PC.
9. Provide Bluetooth data output selection.
Principle
The Vibration Sensor uses three Piezoelectric Vibration Sensors for measurement. Acceleration, speed and displacement parameters are accurately measured by detecting mechanical vibration signals and converting them into electrical signals. The instrument supports a variety of Data output methods including USB, RS-232 and Bluetooth for easy data transmission and analysis.
Applications
Periodic motion measurement, mechanical vibration detection, quality control, equipment maintenance
Notice
* Operating temperature range is 0~ 50 ℃.
* Operating humidity should be less than 90% RH.
* Powered by 4 AA batteries.
* The weight is 415g (without battery).
* Dimensions are 140 * 73 * 35mm.
