Overview
The LANDTEK VM-6380-2 Vibration Meter (dual channel) is designed for on-site measurement of various mechanical vibrations. It is used for periodic motion measurement to detect imBalances and deviations in moving machinery, providing data support for quality control, running time and prior equipment maintenance.
Features
1. Can display the same parameter on two measurement points at the same time, or three parameters on any measurement point (Acceleration, Speed, Displacement)
2. Compliant with international standard ISO2954 for periodic motion measurement to detect imBalances and deviations in moving machinery
3. Designed for on-site measurement of various mechanical vibrations to provide data for quality control, operating time and prior equipment maintenance
4. Select high-performance accelerometers for accurate and reproducible measurements
5. Frequency range, in Acceleration mode, Frequency up to 10Hz~ 10KHz
6. With AC signal output for easy auscultation and recording
7. Optional headphones can be used as a stethoscope
8. Use "USB data cable output" and "RS-232 data cable output" to communicate with PC
9. Provide Bluetooth data output selection
Principle
The vibration sensor collects mechanical vibration signals through two piezoelectric vibration Sensors, converts the vibration into electrical signals for processing, and can simultaneously measure Acceleration, Speed and Displacement parameters, and output measurement results through the Interface.
Applications
Periodic motion measurement, mechanical vibration detection, quality control, equipment maintenance
Steps
1. Install 4 AA batteries for power supply
2. Connect Piezoelectric Vibration Sensor to measurement point
3. Measurement parameters (Acceleration, Speed or Displacement)
4. Read and record measurement data
5. Output data to PC via USB, RS-232 or Bluetooth
Notice
* Operating temperature range is 0~ 50 ℃
* Operating humidity should be less than 90% RH
* The weight without battery is 415g
* Make sure the Sensor is installed correctly when using
* Pay attention to the battery level to ensure normal measurement
