Overview
The LANDTEK VM-6380 Vibration Meter is designed for on-site measurement of various mechanical vibrations. It is used in periodic motion measurement to detect imBalances and deviations in moving machinery, providing data support for quality control, running time and equipment maintenance.
Features
1. The same parameter in the X, Y, and Z directions can be displayed simultaneously, or three parameters in any direction (Acceleration, Speed, Displacement)
2. In line with international standards ISO2954
3. High-performance accelerometers for accurate, reproducible measurements
4. Frequency range up to 10Hz~ 10kHz in Acceleration mode
5. With AC signal output for auscultation and recording
6. Optional headphones can be used as a stethoscope
7. Support USB data cable output and RS-232 data cable output to communicate with PC
8. Provide Bluetooth data output selection
Principle
The vibration measuring instrument detects mechanical vibration signals through a three-dimensional piezoelectric vibration Sensor, converts vibration parameters into electrical signals for processing and display, and realizes multi-directional and multi-Parameter vibration measurement.
Applications
Periodic motion measurement, mechanical vibration detection, quality control, equipment maintenance
Steps
1. Install 2 AA batteries
2. Connect Sensors
3. Select measurement direction and parameters
4. Perform vibration measurements
5. Output data via USB, RS-232 or Bluetooth
Notice
* Operating temperature range is 0~ 50 ℃
* Operating humidity should be less than 90% RH
* The weight without battery is 425g
* Dimensions 137 * 76 * 32mm
* Precision is +/- (5% n + 2) words